Godox V1 Mid Flashgun - Canon

The round head provides a softer, more even light spread, which is more flattering for subjects compared to the harsher light from traditional rectangular flashes.

It can deliver up to 650 full-power flashes on a single charge, with a recycle time of approximately 1.7 seconds at full power.

This specific model is designed for Canon TTL systems. While it might function in manual mode with other brands, TTL auto-exposure will not work correctly without a specific Canon camera.

Yes, the flash uses a rechargeable lithium-ion battery and features convenient USB-C charging.

TTL stands for Through-The-Lens metering. It allows the camera to automatically control the flash output for a correct exposure, simplifying flash photography.

Yes, the V1 Mid features built-in wireless control, allowing it to be used as a master or slave unit within the Godox wireless system for multi-light setups.

Check that the flash is properly mounted on the camera's hot shoe and locked. Ensure the flash and camera are powered on. Verify TTL mode is enabled and the camera is not in a mode that disables flash. Check battery level.

Ensure the flash is in correct TTL mode for your Canon camera. Check for any obstructions between the flash and the camera's infrared receiver if using optical wireless. Calibrate flash settings if possible through the camera or flash menu.

The recycle time may increase if the battery is low. Ensure the battery is fully charged. Lowering the flash output power will result in faster recycle times.

Verify that the flash is set to the correct wireless mode (master or slave) and that the channel and group settings match your transmitter or other flashes. Ensure there are no major obstructions blocking the wireless signal.