Air Belt Sander - AB Tools - 10mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This professional variable speed air belt sander from AB Tools is designed for precise control in a wide range of sanding and polishing tasks on wood, metal, and plastic, especially in tight areas. Its key benefit is the variable speed control offering accuracy for detailed work. A potential caveat is the requirement for a suitable air compressor setup. Key features include five speed settings, a compact and lightweight design with low vibration, and easy belt replacement.
All features
| Model Part Number | AU714_AU023(25) |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What type of compressor is needed for this sander?
You will need an air compressor capable of delivering at least 4 CFM (Cubic Feet per Minute) at a steady 90 PSI operating pressure.
How do I change the sanding belt?
Simply press the belt replacement button on the sander. This releases tension, allowing you to slide off the old belt and slide on a new one. Release the button to tension the new belt.
What materials can this sander be used on?
It is suitable for a wide range of materials including wood, furniture, plastic, aluminum, and all forms of metal. The included belts are specified for wood, paint, varnish, plastics, plastering, and light metal sanding.
Is the speed adjustable?
Yes, the sander features variable speed control with five different speed settings for accurate and controlled work.
What is the size of the sanding belts used by this tool?
The belts are 330mm in length and 10mm in width.
Does it come with a starter set of belts?
Yes, it includes a pack of 25 high-quality sanding belts with grits of 60, 80, 100, and 120.
Can this sander be used for automotive bodywork?
While it can be used for light metal sanding and polishing, it is primarily designed for detail work and may not be suitable for large-scale automotive bodywork which typically requires wider belts and higher material removal rates.
Troubleshooting
Sander not powering on / running weakly
Check air hose connection for leaks. Ensure the air compressor is running and providing adequate pressure (90 PSI). Verify the air consumption (4 CFM) is being met. Clean the air inlet if it appears blocked.
Belt slipping or not tracking correctly
Ensure the belt is correctly installed and the tension is appropriate. Check that the belt is the correct size (330mm x 10mm) and not damaged. Ensure the sanding arm is properly aligned.
Excessive vibration
Check if the sanding belt is worn or damaged. Ensure the tool is properly gripped. Verify the air pressure is within the recommended range.
Air leaks from the tool body
Inspect all connections, especially the air inlet and belt housing. If leaks persist, professional servicing may be required.
Pros and Cons
Pros
- Versatile with variable speed for different materials.
- Compact and lightweight for ease of use and maneuverability.
- Low vibration reduces user fatigue and improves control.
- Simple and quick belt replacement system.
- Suitable for detailed work in hard-to-reach areas.
Cons
- Requires a compatible air compressor and air supply.
- Specific air consumption (4 CFM) must be met by the compressor.
- Operating pressure (90 PSI) needs to be maintained.
- Belt size (330mm x 10mm) is specific, though compatible with many brands.
Setup, Compatibility & Care
Setup:
- Ensure your air compressor is capable of delivering at least 4 CFM at 90 PSI.
- Connect a suitable air hose (not included) to the 1/4" BSP air inlet using the provided quick-release fitting.
- Connect the air hose to your compressor.
Compatibility:
- Air Inlet: 1/4" BSP (standard)
- Operating Pressure: 90 PSI
- Air Consumption: 4 CFM (average)
- Sanding Belts: 330mm x 10mm. Compatible with belts for brands like HITACHI, MAKITA, RYOBI, BLACK AND DECKER, and BOSCH.
Care:
- After Use: Disconnect the air supply. Use a dry cloth to wipe down the tool and remove dust and debris.
- Belt Replacement: Press the belt release button to remove worn belts and slide new ones into place. Ensure the belt is tracking correctly before applying power.
- Lubrication: While not explicitly stated, air tools often benefit from occasional air tool oil applied through the air inlet if used frequently. Consult your compressor manual or a tool specialist for specific recommendations.
- Storage: Store in a clean, dry place when not in use.