HG Laminate, PVC & Vinyl Protector is a liquid polymer emulsion that is very easy to apply and lea...HG Laminate, PVC & Vinyl Protector is a liquid polymer emulsion that is very easy to apply and leaves a glossy, wafer-thin but extremely strong protective film once it has dried. This protects the top layer of the laminate against wear, scratches and other damage. This product also masks faded patches and existing damage, and has an anti-slip effect. Protect your Laminate Flooring against scratching and wear with the HG Gloss Coating. The 1 Litre bottle is simple to use to achieve a pleasing, glossy finish. HG Laminate, Vinyl PVC Protector is a unique and easy to apply polymer emulsion. Forms a wafer-thin glossy yet extremely protective coating when it dries. Protects against wear and tear, scratches and other damages. It also masks faded patches and existing damage. 1 litre is sufficient for approximately 60m per layer.
This guide is for anyone looking to protect and maintain their laminate, PVC, or vinyl flooring. HG Laminate, Vinyl & PVC Protector provides a glossy, protective layer that shields against wear, scratches, and other damage. A single 1-liter bottle covers approximately 60 square meters per layer. However, it's essential to ensure the floor is thoroughly cleaned before application.
All features
Model Part Number
70
Brand
HG
Extended Product Information
FAQs
How much area does one bottle cover?
One liter of HG Laminate, Vinyl & PVC Protector covers approximately 60 square meters per layer.
Can this be used on all types of flooring?
This product is specifically designed for laminate, PVC, and vinyl flooring. Always test in an inconspicuous area first.
How long does it take for the floor to dry?
Drying time can vary, but generally, allow at least an hour for complete drying.
How do I clean the floor after applying the protector?
Use a pH-neutral cleaner to maintain the protective layer and gloss.
Can I apply multiple layers?
Yes, for increased protection and gloss, multiple thin layers can be applied, ensuring each layer dries completely before applying the next.
What should I do if the floor looks streaky after application?
Ensure even application and consider applying a second, thin layer after the first has dried.
Is this product slippery?
No, this product provides an anti-slip effect, enhancing safety.
Troubleshooting
Protector appears uneven or streaky after drying.
Ensure even application. Apply a second, thin layer after the first layer has fully dried.
Floor remains sticky after drying.
This could indicate that too much product was applied. Clean the floor with a suitable cleaner and reapply a thinner layer.
The gloss finish is not as expected.
Ensure the floor was cleaned properly before application. Consider applying a second layer for a more pronounced gloss.
Pros and Cons
Pros
Provides a glossy, protective finish.
Protects against scratches and wear.
Masks existing damage and faded patches.
Easy to apply.
Offers an anti-slip surface.
Cons
Requires thorough cleaning of the floor before application.
Coverage is dependent on the thickness of the applied layer.
May require multiple layers for optimal protection.
Not suitable for all types of flooring; check compatibility.
Setup, Compatibility & Care
Preparation: Before application, thoroughly clean the floor with a suitable cleaner. Ensure the floor is completely dry.
Application: Apply the protector evenly using a clean mop or applicator. Avoid puddles.
Drying: Allow the floor to dry completely. Drying time may vary depending on environmental conditions, but generally, allow at least an hour.
Compatibility: Suitable for laminate, PVC, and vinyl flooring. Always test in an inconspicuous area first.
Care: Regular cleaning with a pH-neutral cleaner is recommended to maintain the protective layer and gloss. Avoid abrasive cleaners and excessive water.