Cat6 RJ45 Euro Data Module - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This KAUDEN Euro style Cat6 RJ45 Data Module in white is designed for network professionals and DIY installers seeking a reliable and compliant solution for data connectivity. Its key benefit is providing certified Cat6 performance for high-speed data transmission within standard faceplates. A potential caveat is its specific aperture size requirement (50x25mm), necessitating compatibility checks with existing or chosen faceplates.
All features
| Model Part Number | SM606V/C6/WH |
|---|---|
| Brand | KAUDEN |
Extended Product Information
FAQs
What is the primary advantage of using a Cat6 module?
Cat6 modules are designed to support higher data transfer rates and bandwidth compared to older categories, ensuring better performance for modern network applications like Gigabit Ethernet.
Does this module come with a keystone or is it a standalone module?
This is a Euro-style module designed to snap directly into compatible Euro-style faceplates or enclosures, rather than a traditional keystone jack that typically fits into a larger keystone opening.
Is this module shielded?
No, this is an unshielded (UTP) data module. For environments with high electromagnetic interference (EMI), a shielded Cat6 module might be more appropriate.
What does '50x25mm aperture' mean?
It refers to the dimensions of the rectangular opening in the faceplate or enclosure where the module is intended to be installed. The module's face is approximately 50mm high and 25mm wide.
Can I use this for Cat5e cables?
While it might physically connect, to achieve Cat6 performance standards, it is recommended to use Cat6 rated cable. Using Cat5e cable with a Cat6 module will limit performance to Cat5e levels.
What wiring standard is supported (568A or 568B)?
This module is color-coded for the 568B wiring standard, which is common in many regions. Ensure consistency with the other end of your cable run.
Do I need any special tools to install this?
You will need an IDC termination tool (punch-down tool) to properly seat the wires into the terminals. A cable stripper is also required.
Troubleshooting
No network connectivity after installation
Double-check that all 8 wires are correctly terminated according to the 568B color code on both ends of the cable run and that each wire is fully seated in its IDC terminal. Ensure the cable is Cat6 rated.
Slow network speeds or intermittent connection
Verify that the cable used is indeed Cat6 rated and that the termination is clean and secure. Ensure the module is not damaged and the faceplate aperture is not causing undue stress on the cable.
Difficulty terminating wires
Use a proper IDC punch-down tool. Ensure the tool is seated correctly over the wire and terminal before activating. Do not force wires; they should seat with firm pressure.
Module does not fit aperture securely
Confirm that the faceplate aperture is the correct size (50x25mm) and designed for Euro-style modules. Ensure the module's retention clips are functioning correctly and the faceplate is properly mounted.
Pros and Cons
Pros
- Ensures reliable Cat6 network performance.
- Compatible with standard Euro-style faceplates.
- Simplifies installation with color-coded IDC terminals.
- Durable and safe with flame-retardant housing.
- Includes a useful label cover for organization.
Cons
- Requires a specific aperture size (50x25mm).
- Unshielded design may not be suitable for all environments.
- Does not include integrated magnetics or LEDs.
- Sourced from China, which may be a consideration for some procurement policies.
Setup, Compatibility & Care
Setup:
- Ensure you have a compatible faceplate or enclosure with a 50x25mm aperture.
- Prepare the network cable ends by stripping the outer jacket.
- Arrange the individual wire conductors according to the 568B color code printed on the module.
- Using an IDC termination tool (punch-down tool), firmly seat each wire into the corresponding IDC terminal on the module. The tool will cut off excess wire.
- Close the hinged label cover and snap the module into the faceplate aperture.
Compatibility:
- Faceplates: Compatible with KAUDEN plastic or decorative faceplate ranges designed to accept 50x25mm Euro modules. Verify compatibility with third-party faceplates by checking aperture dimensions.
- Cable: Suitable for use with solid or stranded Cat6 UTP (Unshielded Twisted Pair) network cables.
- Standards: Compliant with UK/EU BS EN 50173-6.
Care:
- Clean the module and surrounding faceplate with a dry or slightly damp, lint-free cloth.
- Avoid using abrasive cleaners or solvents, which can damage the plastic housing.
- Ensure connections remain secure and free from dust or debris.