Bosch Files Set 5 Piece - Carbon Steel

These files are suitable for most common metals, including steel, aluminum, brass, and copper. They can also be used on harder plastics.

The files have a medium-grade roughness (Stroke 2 cut), which is efficient for material removal and general smoothing. For very fine finishing, you might need finer grit files or abrasive materials.

After use, clean the files with a stiff wire brush or a file card to remove metal filings. Ensure they are completely dry before storing to prevent rust.

The ergonomic softgrip handles with thumb pressing areas are designed to provide a comfortable and secure grip, reducing hand fatigue during prolonged use.

While they may remove wood, these files are designed for metal. Using them on wood will dull the teeth quickly and is not their intended purpose. Specialized wood rasps or files are recommended for woodworking.

Store the files in a dry place, ideally using the hanging holes to keep them separated and protected on a tool rack or pegboard. Avoid letting them rub against other hard tools.

'Stroke 2 cut' refers to the type of tooth pattern, indicating a medium-grade roughness suitable for general-purpose metal removal and shaping.

Use a stiff wire brush to gently scrub the teeth and remove packed debris. For stubborn material, a file card can be used.

Clean the file thoroughly with a brush. If rust is present, use fine steel wool or a rust remover, then dry completely. Apply a light coat of oil for protection and store in a dry environment.

Ensure the file teeth are clean. If the teeth are worn down or damaged, the file may need to be replaced. This is normal wear and tear for files.

Check the connection between the handle and the file tang. If the handle is a press-fit type and becomes loose, it may not be repairable. Ensure a secure grip during use.