These Wood jointing biscuit from Erbauer are great for joining two pieces of wood.
Best current price£6.34from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.34Visit shop B&Q - No. 0 Jointing BiscuitsPack Of 100
Visit shop1 offer from £6.34
View price history by clicking the chart icon.
This guide is for woodworkers seeking a reliable method for joining two pieces of wood. The Erbauer No. 0 Jointing Biscuits offer a strong and clean solution for creating seamless wood joints. A minor consideration is ensuring the correct biscuit size is used for the specific jointing application. These biscuits are designed to interlock with corresponding slots cut into the wood pieces, creating a strong mechanical bond when glue is applied.
| Brand | Erbauer |
|---|
Biscuit joiners use numbered sizes (e.g., No. 0, No. 10, No. 20) which correspond to specific biscuit dimensions. The size chosen depends on the thickness of the wood and the required joint strength. No. 0 biscuits are typically used for joining thinner materials or for alignment purposes.
While the biscuit provides a mechanical lock, glue is essential for creating a strong and durable joint. The glue fills any small gaps and bonds the biscuit and wood together.
The number of biscuits per joint depends on the length of the joint and the desired strength. For typical applications, two to four biscuits are usually sufficient for joining two moderate-length pieces.
These biscuits are made of compressed wood and are best suited for interior projects. For exterior use, consider specialized waterproof glues and joinery methods that are more resistant to moisture.
Drying times vary depending on the type of wood glue used and environmental conditions. Always refer to the glue manufacturer's instructions, but typically, allow at least 30-60 minutes for initial set and 24 hours for full cure before stressing the joint.
Yes, biscuits can be used effectively in miter joints to add strength and ensure accurate alignment, especially for picture frames or boxes.
Ensure the slot was cut with the correct size blade for No. 0 biscuits and that the biscuit joiner is properly calibrated. If the slot is too large, you may need to re-evaluate the joinery method or use a larger biscuit size if available.
Verify that sufficient glue was applied to both the biscuit and the inside of the slot, as well as the mating surfaces. Ensure the wood pieces were clamped with adequate pressure and for the recommended drying time. Check that the wood was clean and free of dust before gluing.
Store biscuits in a dry place away from humidity. Ensure the packaging is resealed after use.
Setup: To use Erbauer No. 0 Jointing Biscuits, you will need a biscuit joiner tool. First, mark your joint lines on the wood pieces. Use the biscuit joiner to cut slots of the appropriate size and depth into both pieces where they will meet. Ensure the slots are clean and free of debris. Apply wood glue generously into the slots and onto the joining surfaces of the wood. Insert the biscuits into the slots, align the wood pieces, and clamp them firmly together. Wipe away any excess glue immediately with a damp cloth.
Compatibility: These biscuits are compatible with standard No. 0 biscuit joiners and general wood glues. They are suitable for use with most common hardwoods and softwoods.
Care: Biscuits should be stored in a dry environment to prevent moisture absorption, which could lead to swelling or degradation. Keep the packaging sealed when not in use.
