Kenable Cable Clips - Black

These clips are designed to hold cables with a diameter between 7mm and 10mm.

Each pack contains 100 hook cable clips.

Yes, they are designed with a shock-resistant body and suitable for most indoor or outdoor DIY jobs.

You will need a hammer to install the integrated nails into your chosen surface.

While they can be removed, the nails will leave holes in the mounting surface, so they are generally intended for permanent installation.

The clips are made from tough PE (polyethylene), known for its elasticity and shock resistance.

It is not recommended to directly nail them into metal surfaces as the nail may not hold securely or could damage the surface. Pre-drilling and using appropriate fasteners would be a better approach for metal.

Ensure the nail is fully driven into the mounting surface. If the surface is too hard (e.g., concrete or very dense wood), pre-drilling a small pilot hole may be necessary, or consider a different mounting location.

Verify the cable diameter is within the 7mm to 10mm range. If the cable is slightly smaller, multiple cables might be bundled within one clip. If it's slightly larger, consider using the next available size clip if possible.

Ensure you are using a hammer correctly and striking the nail head squarely. If the surface is extremely hard, a pilot hole might be required.