Laser Tools Easy Flow Pump - 8955
Best current price£42.98from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£42.98Visit shop Laser 8955 Easy Flow Pump 20L Drums
Visit shopAmazon£42.98Visit shop All Offers
4 offers from £42.98 - £52.43
View price history by clicking the chart icon.
Laser Tools 8955 Easy Flow Pump 20L DrumsFree delivery in 1–3 days£52.42Visit shop →
LASER 8955 Easy Flow Pump For 20L Drums Nylon Steel Aluminium 70cc StrokeFree delivery in 1–3 days£52.43Visit shop →
Product Information
Full details
The Laser Tools Easy Flow Pump (8955) is designed for mechanics and DIY enthusiasts needing an efficient way to transfer engine oil, gear oil, and transmission fluid (ATF). Its key benefit is a robust flow rate of 70cc per stroke, combined with versatile drum adaptors for different container types. A potential consideration is its specific fitting for 2 ¼” threaded drums, though an adaptor is included for common 20L plastic drums.
All features
| Model Part Number | 8955 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What types of oil can this pump be used with?
This pump is suitable for engine oil, gear oil, and automatic transmission fluid (ATF).
What drum sizes does this pump fit?
It is designed for 2 ¼” threaded drums and includes an 88RA adaptor for 20L plastic oil drums. An additional adaptor kit (Part No. 7622) is available for other sizes.
What is the flow rate of the pump?
The pump delivers a flow rate of 70cc per stroke.
How long is the hose?
The included PVC hose is 127cm (50 inches) long.
How do I clean the pump after use?
After emptying, run a small amount of clean solvent or a compatible cleaner through the pump and hose to remove residual oil. Allow it to dry before storing.
Can I use this pump for other fluids besides oil?
While designed for automotive oils, its suitability for other non-corrosive fluids would depend on their viscosity and chemical compatibility with Nylon, Steel, Aluminium, and PVC. Always check fluid compatibility if deviating from intended use.
Does it come with all necessary adaptors?
It comes with an 88RA drum adaptor for 20L plastic drums. The adaptor for 2 ¼” threaded drums is integrated into the pump's design. Other adaptors may need to be purchased separately.
Troubleshooting
Pump not drawing fluid
Ensure the intake end of the hose is fully submerged in the fluid. Check for any kinks or blockages in the hose. Verify that the pump is creating a seal with the drum or adaptor.
Low flow rate
Check for air leaks around the pump and hose connections. Ensure the fluid is not excessively thick or cold, as this can affect flow. Clean the pump mechanism if debris is suspected.
Fluid leaks from connections
Tighten the pump connection to the drum or adaptor. Inspect the seals on the adaptor and hose connections for damage and replace if necessary.
Pump difficult to operate
Ensure the pump is not obstructed. Check for blockages within the pump mechanism. If transferring very cold or thick oil, warming the oil slightly may improve performance.
Pros and Cons
Pros
- Efficiently transfers multiple types of automotive oils.
- High flow rate reduces fluid transfer time.
- Durable materials ensure long service life.
- Adaptors provide flexibility for different drum sizes.
- Long hose allows access to most containers.
Cons
- Primarily designed for 2 ¼” threaded drums; other drums require adaptors.
- Flow rate may be less critical for very small fluid transfers.
- Requires manual pumping, which can be physically demanding for very large volumes.
Setup, Compatibility & Care
Setup:
- Ensure the pump is securely attached to the drum. If using a 2 ¼” threaded drum, screw the pump directly into the opening. If using a 20L plastic drum, attach the 88RA drum adaptor first, then screw the pump into the adaptor.
- Connect the PVC hose to the pump outlet if it is not already attached.
Compatibility:
- Compatible with engine oil, gear oil, and transmission oil (ATF).
- Standard fitting is for 2 ¼” threaded drums.
- Includes 88RA adaptor for 20L plastic oil drums.
- Laser Part No. 7622 thread adaptor kit available for additional compatibility.
Care:
- After use, clear any residual oil from the pump and hose. Running a small amount of clean solvent or a compatible cleaner through the pump can help prevent blockages and contamination.
- Store the pump in a clean, dry environment, ideally with the hose coiled neatly to prevent kinks.
- Periodically inspect the Nylon pump body, steel tube, and PVC hose for any signs of wear or damage.