Draper Expert High Frequency Plasma Cutter - 40A

The Draper Expert Plasma Cutter can cut stainless steel, aluminum, and other metals up to 12mm thick.

It requires a 230V AC power supply.

No, a suitable 32A plug must be fitted by a qualified electrician.

The duty cycle is 60% @40A and 100% @25A.

The package includes the plasma cutter, an AG60 plasma cutting torch (4m cable), and a 200A earth clamp (1.8m cable).

Always wear appropriate safety gear, including a welding helmet, gloves, and protective clothing. Ensure adequate ventilation and never cut near flammable materials.

Regularly clean the cutting torch, check and clean the air filter, and inspect the cables and connections for any damage.

Check the power connection, ensure the plug is correctly installed by a qualified electrician, and that the power supply is working. Check the power switch is in the 'on' position.

Check the air supply and ensure the air pressure is correct. Also, inspect the cutting torch for wear or damage. Adjust the cutting speed and amperage.

Increase the amperage setting, but do not exceed the recommended settings for the material's thickness.

Allow the machine to cool down. It may have reached its duty cycle limit or triggered the thermal overload protection. Reduce the amperage and/or cut in shorter intervals.

Ensure the correct amperage is set for the metal thickness, and that the torch is held at the correct angle and distance from the workpiece.