Felco Replacement Blade - 620/3

This is a genuine replacement blade for Felco pruning saw models 62, 620, and 621.

The blade is designed to cut through branches and stems up to 6 inches in diameter.

After each use, wipe the blade clean with a dry cloth to remove sap and moisture. Store the saw in a dry place. For long-term storage, a light application of tool oil can help prevent rust.

Typically, you will need the appropriate screwdriver or wrench to detach the old blade and secure the new one, depending on the hardware used on your specific Felco saw model. Consult your saw's manual for precise instructions.

This is a single-piece replacement blade. The teeth are precision-ground directly into the steel. If the teeth become dull or damaged beyond repair, the entire blade needs to be replaced.

Yes, the blade can be sharpened. However, due to the precision-ground nature of the teeth, it is recommended to use a Felco-approved sharpening file or consult a professional sharpening service to maintain optimal cutting performance.

Ensure the blade is properly aligned and securely fastened to the saw handle. Check if the teeth are dull or damaged. Clean any sap or debris from the blade. If dull, consider sharpening or replacing the blade.

Verify that all mounting screws or bolts are tightened securely. Ensure you are using the correct blade for your specific Felco saw model (62/620 or 621).

Confirm the blade is the correct model (620/3) for your Felco saw (62/620 or 621). Ensure no debris is obstructing the mounting points on both the blade and the handle.

Although made of rust-resistant chrome steel, prolonged exposure to moisture can cause minor surface rust. Clean the blade immediately with a soft cloth and dry thoroughly. Consider applying a light coat of tool oil for extra protection if stored for long periods.