Best current price£41.54from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£41.54Visit shop Sealey Light S01045 Air Saw Reciprocating
Visit shop
B&Q£42.95Visit shop B&Q - Reciprocating Air Saw With Safety Trigger Device 10000 Rpm S01045
Visit shop11 offers from £41.54 - £54.00
View price history by clicking the chart icon.
This guide is designed for DIY enthusiasts and light garage users who need a reliable tool for quickly removing damaged panels during crash-repair preparation. The Sealey Air Saw Reciprocating - S01045 offers fast and efficient cutting of steel and aluminum. Keep in mind that the maximum cutting capacity is 2mm for steel and 2.5mm for aluminum, so it may not be suitable for thicker materials.
| Model Part Number | S01045 |
|---|---|
| Brand | Sealey |
The saw uses blades designed for reciprocating air saws. Specific blade types will depend on the material being cut.
The maximum cutting capacity is 2mm for steel and 2.5mm for aluminum.
The air saw requires an air supply of 90psi.
Yes, it is supplied with a starter pack of blades.
Regularly lubricate the saw with pneumatic tool oil. Keep the saw clean and replace worn blades.
Always wear safety glasses and gloves when operating the air saw. Ensure the material is securely clamped before cutting. Use the safety trigger.
Replacement blades can be purchased from Sealey retailers or online suppliers.
While primarily designed for steel and aluminum, the saw might be used on other thin, soft materials, but always check the material's thickness and suitability.
Check the air supply connection and ensure the air compressor is turned on. Verify the air pressure meets the required 90psi and 4cfm. Inspect the safety trigger to ensure it is fully engaged.
Check the blade for damage or dullness and replace if necessary. Ensure the blade guide is correctly adjusted. Increase the air pressure if it is within the recommended range. Make sure the material is properly supported during cutting.
Check the blade for secure mounting. Examine the blade guide for wear or looseness. If vibration persists, the saw may need servicing.
