Electrastim Replacement Connector Cable

You will need one cable for each channel. Therefore, for a dual-channel stimulator, you require two cables.

The 2 x 2mm pins are designed to fit all ElectraStim electrodes and are compatible with many other brands. However, it's always best to consult the instructions for your specific electrode model for guaranteed compatibility.

This cable serves as a replacement for a damaged or worn connection cable, ensuring safe and effective power delivery from your ElectraStim stimulator to your electroplay toy or electrode.

Cables should be replaced when they show signs of wear, such as fraying, damage to insulation, or intermittent performance. With regular use, this might be after several years, but inspection is key.

The 3.8mm safety connector is specifically for ElectraStim toys. While the 2mm pins might connect to other devices, ElectraStim recommends visiting their 'Cables and Adapters' section for confirmed compatibility with other brands.

The colors (Black, Red) primarily serve for identification or user preference and do not indicate different functionalities for the cable's performance.

Ensure the 3.8mm connector is fully plugged into the toy and the 2mm pins are securely connected to the electrode. Check that the cable is not damaged. Try a different cable if available. Verify the stimulator is functioning correctly and has sufficient battery.

Gently ensure the 3.8mm connector is seated firmly. If the pins on the 2mm end feel loose, check if they are bent or if the electrode connection is worn. Replace the cable if the connection is compromised.

This often indicates a faulty cable. Replace the suspect cable with a new ElectraStim Replacement Cable. Also, check the stimulator's battery level and ensure the electrode is properly attached.