Best current price£13.59from eBay
Shopping.co.uk recommended and popular offers
eBay£13.59Visit shop 3x Bartoline PVA Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500mL
Visit shop
B&Q£16.99Visit shop B&Q - 3X Pva Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500Ml
Visit shop3 offers from £13.59 - £16.99
View price history by clicking the chart icon.
The Bartoline PVA Adhesive & Sealer is a versatile white, water-based bonding agent, adhesive, and sealer designed for a wide range of DIY and building tasks. It excels as a multi-purpose adhesive, a primer for porous surfaces, a dust sealer, and an admixture for cementitious materials. While it offers excellent adhesion to most building substrates, it is not suitable for use on PVC or rubber, nor in exterior applications or areas prone to constant damp.
| Colour | White |
|---|---|
| Model Part Number | BA5180 |
| Brand | Bartoline |
It bonds to most common building and DIY materials such as wood, cork, textiles, plaster, plasterboard, and concrete. It is not suitable for PVC or rubber.
No, Bartoline PVA is for interior use only and must not be used in exterior applications or in areas subject to constant damp.
Dilute 1 part PVA with 4 parts water and apply evenly with a brush to seal porous surfaces like plaster or plasterboard.
The bond forms relatively quickly, but it takes approximately 24 hours for the adhesive to reach maximum strength.
Yes, it can be used as an admixture to improve adhesion and tensile strength. For small cement renders, mix PVA with an equal amount of water and add to the mortar. For larger areas, dilute 3 parts PVA with 1 part water and brush onto the surface before applying the render.
Clean up spills and tools immediately after use with warm water.
It should not be used in areas subject to constant damp. Ensure good ventilation if used in areas with occasional moisture, but it is not recommended for constant exposure.
Ensure surfaces were clean, dry, and free from grease. Verify that joints were clamped securely for the full 24 hours recommended for maximum strength. Reapply if necessary, ensuring proper surface preparation.
Check if the dilution ratio (1 part PVA to 4 parts water) was followed correctly. Ensure the PVA was applied evenly and allowed to penetrate. For very porous surfaces, a second coat may be needed.
This can occur in humid conditions or if applied too thickly. Ensure adequate ventilation. While it may remain tacky for longer, it will continue to cure. Avoid further treatments until it has sufficiently dried.
Clean tools immediately after use with warm water. If the PVA has dried on tools, it may require soaking or mechanical removal.
Preparation: Ensure all surfaces are clean, dry, sound, and free from grease before application.
Compatibility: Bonds to most common building and DIY materials including wood, cork, textiles, plaster, plasterboard, and concrete. Do not use on PVC or rubber.
Usage:
Care: Clean tools and spills immediately with water. Store in a cool, dry place away from frost. Ensure the container is tightly sealed after use.
Limitations: This product is for interior use only and should not be used in areas exposed to constant damp or moisture.
