All Pond Solutions Pressurised Pond Filter - Yellow - PFC-5000
Our range of pressurised pond filters with built-in UV clarifiers are designed to be continuously ...Our range of pressurised pond filters with built-in UV clarifiers are designed to be continuously pressurised by your pond pump, maintaining excellent water quality for healthy fishkeeping. Water can be fed directly from your pond pump through to the filter container and subsequently the outlet, continuously under pressure. The water outlet can be located higher than the actual filter body, making it easier to disguise around the pond - particularly useful if incorporating a waterfall! Supplied with a fantastic new rotating cleaning handle on the head, maintaining the pressurised filter is now even easier! The unit will inform you when it is in need of a detailed clean using a small float, which pops-out of the head of the unit when required. By simply turning the handle you can rinse clean the interior sponge, reducing the need to dis-assemble! Once rinsed, a separate outlet can be opened to discharge any dirty water until it runs clean and basic maintenance is complete. Each unit is supplied with a built-in UV light, which effectively prevents growth of algae and eliminates harmful micro-organisms and parasites which may cause fish diseases. Filtration: Water passes through the PFC-5000 in the following order: 1) Pond water flows into the PFC-5000 via your pond pump. 2) Initial filtration begins by removing large particles through a mixture of coarse and fine filter foams (mechanical filtration). 3) Then the water passes across bio balls that harbour good bacteria across large surface area (biological filtration). 4) Lastly the exiting water is exposed to a 11w UV steriliser capable of reducing harmful bacteria and algae. 5) Clean, clear and healthy water exits your PFC-5000 and returns to your pond. Please note: The diagram above is only an example of the water route through the system and does not exactly match this filters features. Features: Each unit is supplied with 4 small filter foams: 2x fine yellow foams (small), 2x coarse blue foams (s... Our range of pressurised pond filters with built-in UV clarifiers are designed to be continuously pressurised by your pond pump, maintaining...
This guide is for pond owners seeking to maintain crystal-clear water and a healthy environment for their fish using the All Pond Solutions PFC-5000 filter. The PFC-5000 combines mechanical, biological, and UV filtration to effectively remove debris, control algae, and eliminate harmful microorganisms. Keep in mind that while this filter is powerful, regular maintenance is essential to ensure optimal performance. This guide provides comprehensive instructions for setup, use, and troubleshooting.
All features
Colour
Yellow
Model Part Number
PFC-5000
Brand
AllPondSolutions
Extended Product Information
FAQs
How often should I clean the filter?
Clean the filter when the indicator signals or as needed, depending on debris accumulation. This is typically every few weeks or months.
How do I replace the UV bulb?
Unplug the filter, remove the UV bulb housing, and replace the bulb with a compatible replacement. Consult the product manual for detailed instructions.
What size pond is this filter suitable for?
Refer to the product specifications for the recommended pond volume.
Can I use this filter with a fountain?
Yes, you can use the outlet to return water, however it is primarily designed to return water to the pond.
What type of pump do I need?
You will need a submersible pond pump with a flow rate appropriate for your pond size and this filter. It is not included.
Where can I buy replacement parts?
Replacement parts, such as filter foams and UV bulbs, are often available from the manufacturer or online retailers.
How do I know if the filter is working correctly?
Your pond water should be clear, and your fish should appear healthy. Inspect the filter and hoses to be sure there are no leaks or clogs.
Troubleshooting
Pond water is cloudy.
Clean the filter foams, check the UV bulb, and ensure the pump is providing adequate flow.
UV light not working.
Check the power connection, replace the UV bulb if necessary.
Reduced water flow.
Clean the filter foams, check for blockages in the hoses or filter inlet/outlet.
Algae growth in the pond.
Ensure the UV light is functioning correctly and consider reducing sunlight exposure.
Filter is leaking.
Check all connections, tighten if necessary, and inspect the filter housing for cracks.
Pros and Cons
Pros
Comprehensive filtration (mechanical, biological, and UV).
Easy to maintain with the rotating cleaning handle.
UV clarifier helps control algae and harmful organisms.
Can be positioned above the pond water level.
Effective at maintaining water clarity.
Cons
Requires a pond pump (not included).
Filter foams need periodic replacement.
UV bulb requires replacement.
Cleaning is still required, despite the rotating handle.
Size may be a consideration for smaller ponds.
Setup, Compatibility & Care
Setup:
Connect the pond pump outlet to the filter inlet.
Connect the filter outlet to the desired return location (e.g., waterfall, pond). Ensure the return is positioned to allow water circulation.
Ensure that the filter is positioned on a stable, level surface.
Plug in the UV light and power on the pump.
Allow the filter to run continuously for optimal performance.
Compatibility:
Pond Pumps: Requires a compatible pond pump (not included).
Pond Size: Suitable for ponds of varying sizes; refer to the product specifications for the recommended pond volume.
Care:
Cleaning: Use the rotating handle to rinse the filter sponges when the cleaning indicator signals.
Backwash: Open the separate outlet to discharge dirty water.
UV Bulb Replacement: Replace the UV bulb every 6-12 months for optimal performance.
Foam Replacement: Replace the filter foams when they become worn or damaged.
Inspect Regularly: Check the filter and connections periodically for any leaks or blockages. Clean any debris from the filter housing or hoses.