Loops Door Handle & Bathroom Lock Pack - Gold

The components are finished in polished brass, suggesting a metal construction beneath the finish, designed for interior use.

This pack is designed for interior doors. The polished brass finish may not withstand exterior weather conditions, and the lock mechanism is typically suited for internal privacy.

The included hinges measure 76mm in length and 50mm in width.

The bathroom latch has an emergency release slot on the exterior, typically requiring a small flathead screwdriver or a coin to operate.

Installation templates are typically not included. Standard measurements and practices for door hardware installation should be followed.

It is recommended to wipe down the finish with a soft cloth after use to maintain its shine and prevent water spots or fingerprints. Deep cleaning should be done periodically with mild soap and water.

The latch has a depth of 78mm.

Check and tighten the fixing screws that secure the handles to the spindle and door.

Ensure the latch mechanism is correctly aligned within the door and lubricate the internal moving parts of the thumb turn with a graphite-based lubricant if necessary.

Apply a small amount of lubricant (e.g., WD-40 or silicone spray) to the hinge pins. Ensure the hinges are correctly aligned and screws are tightened.

Verify that the strike plate on the door frame is correctly aligned with the latch bolt. Adjust the strike plate or door frame if necessary.