Crown Trade Universal Metal Primer - Grey - 1L

This primer is suitable for most ferrous (like steel and iron) and non-ferrous metals (like aluminum and brass), as well as suitably prepared galvanized steelwork.

This primer is specifically formulated for metal surfaces and is not recommended for use on wood or plastic.

The primer is touch dry in 2-3 hours, but you must wait at least 6 hours before applying a recoat.

Yes, this primer is suitable for both interior and exterior applications.

The spreading rate is up to 12 square meters per litre, depending on the surface porosity and application method.

Galvanized steel should be suitably prepared. While not detailed here, typically this involves cleaning and possibly a light abrasive treatment or specific pre-treatment to ensure adhesion.

Yes, the primer contains rust-inhibiting properties to help reduce the risk of corrosion on metal surfaces.

Ensure the metal surface was thoroughly cleaned and degreased prior to application. Light abrasion of the surface can also improve adhesion. Recheck compatibility with the specific metal type.

This may indicate inadequate surface preparation or that existing rust was not fully removed. Ensure all loose rust was meticulously removed and the primer has fully dried. A second coat might be necessary.

Apply the primer with thin, even coats using a good quality brush. Avoid overworking the paint. Ensure the primer is well stirred before use.

Check storage conditions; extreme cold can thicken paint. If necessary and permitted by manufacturer guidelines (refer to product documentation), a small amount of appropriate thinner might be used, but avoid over-thinning.