Brother Imaging Drum Unit - Black

The DR-2000 drum unit has a page yield of approximately 12,000 pages. You should replace it when your printer indicates it's at the end of its life or when print quality significantly declines.

The toner cartridge contains the toner powder that is used for printing. The drum unit is a separate component that transfers the toner image onto the paper. They work together, and both typically need replacement over time.

While non-original drum units may be available, Brother strongly recommends using original Brother supplies like the DR-2000 to ensure optimal performance, print quality, and reliability with your Brother printer.

Your Brother printer will usually display a message or an indicator light when the drum unit needs to be replaced. You may also notice a decline in print quality, such as faint prints, lines, or smudges.

It is generally not recommended to clean the drum unit's surface. Handling it improperly can cause damage. If you encounter print quality issues, it's usually best to replace the unit.

The package dimensions are approximately 207 mm (Width) x 110 mm (Depth) x 355 mm (Height).

The drum unit may be nearing the end of its life or could be damaged. Ensure it was installed correctly. If the issue persists after correct installation, consider replacing the drum unit.

Ensure the drum unit is correctly seated in the printer and that any protective covers have been removed. Power cycle the printer (turn it off, unplug, wait 30 seconds, then plug back in and turn on).

Check that the drum unit is properly installed. Consult your printer's user manual for specific error code meanings related to the drum unit.