Bird Brand Creoshield Timber Treatment - Light - 4 Litre

Bird Brand Creoshield is a new solvent-based, ready-to-use exterior timber treatment that imparts ...

Best current price£20.33from Bradfords

All Offers

2 offers from £20.33 - £22.99

View price history by clicking the chart icon.

BradfordsBird Brand - Creoshield Timber Treatment - 4L - Light Brown
£25.00 delivery
£20.33
Visit shop
B&QB&Q - Creoshield Timber Treatment Light4 Litre
Free delivery in 1–3 days
£22.99
Visit shop

Product Information

Full details

Bird Brand Creoshield is a ready-to-use, solvent-based exterior timber treatment designed for users seeking a sustainable, eco-friendly alternative to traditional creosote. It provides an attractive, water-repellent finish that mimics old creosote while reducing odour. The primary benefit is its deep penetration and wax-enhanced protection against rainwater for approximately one year, suitable for various timber surfaces. A caveat is that the water-repellent property typically lasts for about one year, requiring reapplication for continued protection.

All features

Model Part NumberCreoshield
BrandBird Brand

Extended Product Information

FAQs

How long does the water-repellent effect last?

The water-repellent finish with added wax beading protection lasts for approximately 1 year. Regular inspection and reapplication are recommended for continued protection.

Is Bird Brand Creoshield suitable for decking?

Yes, it is suitable for exterior timber structures, including decking, provided it is not in direct contact with foodstuffs or drinking water. It helps protect against weathering.

Can I apply Creoshield over existing paint or varnish?

No, Creoshield is designed to penetrate bare timber. Existing paint or varnish must be completely removed before application for effective treatment.

What is the difference between Creoshield and traditional creosote?

Creoshield is a more sustainable and eco-friendly replacement for traditional creosote. It offers a similar aesthetic but with a reduced, characteristic odour and added wax for water repellency.

How should I clean my brushes after using Creoshield?

Clean application tools with a suitable solvent immediately after use. Avoid allowing the product to dry on brushes or equipment.

Can I use this product indoors?

No, Bird Brand Creoshield is specifically formulated for exterior timber treatment and should not be used indoors due to its solvent base and odour characteristics during application.

What is the drying time?

The solvent-based formulation allows for minimized drying times. Specific drying times can vary based on temperature and humidity, but it is designed to be relatively quick compared to water-based alternatives.

Troubleshooting

Uneven finish or colour

Ensure timber is uniformly dry and free from dust before application. Apply liberally and evenly with a brush, working the product into the grain. Avoid over-application in one spot.

Water beading is reduced after one year

This is expected performance. Reapply a fresh coat of Creoshield to the clean timber surface to restore water repellency and protection.

Product seems to dry too quickly

Apply in cooler conditions (around 10-15°C) or work in smaller sections. Ensure you maintain a wet edge during application to blend sections seamlessly.

Slight odour persists after drying

Ensure adequate ventilation during and after application. The odour should dissipate completely over time. If it persists, reapply a thinner, more even coat after the initial one has fully cured.

Pros and Cons

Pros

  • Provides a visually appealing, traditional aesthetic.
  • Offers effective water repellency for seasonal protection.
  • Penetrates timber deeply for thorough treatment.
  • Less odorous than traditional creosote.
  • Dries relatively quickly due to its solvent base.
  • Suitable for a range of timber finishes.

Cons

  • Water repellency lasts approximately one year, requiring reapplication.
  • Solvent-based, which may require specific ventilation during application.
  • Not suitable for use on treated timber or areas in direct contact with foodstuffs.
  • Requires a specific application method for best results.

Setup, Compatibility & Care

Preparation:

Ensure the timber surface is clean, dry, and free from any existing treatments that might interfere with penetration. Remove any loose debris, moss, or algae. For best results, apply to bare, untreated timber.

Application:

Apply Bird Brand Creoshield liberally using a brush or sprayer. For rough sawn timber, a brush is often preferred to work the product into the grain. For smoother surfaces, a sprayer can be effective, followed by brushing to ensure even coverage. Apply in dry conditions, ideally when temperatures are between 10°C and 25°C.

Compatibility:

Creoshield is designed for use on exterior timber. It is not suitable for use on timber that will come into direct contact with foodstuffs or drinking water. Do not use on wood previously treated with other finishes unless compatibility has been confirmed. Always test on an inconspicuous area first.

Care and Maintenance:

Once applied, Creoshield penetrates the timber and becomes odourless when dry. The water-repellent finish typically lasts for approximately one year. Inspect treated timber annually. Reapply as needed, following the same application guidelines, to maintain protection and appearance. Clean application tools with a suitable solvent immediately after use.

Similar items

Price History

DatePrice
Visit shop