CPU8PIN Motherboard Extension Cable - Black - RCD510 RCD31
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Black CPU8PIN Motherboard Extension Cable is designed for PC builders seeking a clean and organized build with ARGB lighting capabilities. Its 90° connectivity and 18AWG wiring ensure reliable power delivery and a streamlined aesthetic, but requires careful attention to graphics card clearance for a secure fit. Key features include ARGB support, a closed interface design, and durable ABS construction.
All features
| Colour | Black |
|---|---|
| Model Part Number | RCD510 RCD31 |
| Brand | Unbranded |
Extended Product Information
FAQs
What is the main benefit of using this 90° extension cable?
The main benefit is improved cable management and aesthetics, especially in tight PC cases, by allowing the CPU power cable to route neatly along the edge of the motherboard.
Does this cable support RGB or ARGB lighting?
Yes, this cable features 5V 3-pin ARGB lighting that can be connected to a compatible motherboard header for customizable lighting effects.
What is the wire gauge, and why is it important?
The wire gauge is 18AWG, which is a thicker gauge wire. This is important for ensuring stable and sufficient power delivery to the CPU without overheating or voltage drop.
What is the maximum height clearance needed for the graphics card?
The plastic of the graphics card should not be higher than the power interface by more than 6mm to ensure a completely closed and secure connection with the motherboard's CPU 8-pin socket.
Will this cable fit any motherboard?
It is designed for motherboards with a standard CPU 8-pin power connector. However, physical clearance around the socket, particularly from the graphics card, is critical for proper installation.
What material is the cable housing made from?
The cable housing is made from durable ABS plastic.
How do I connect the ARGB lighting?
Connect the 3-pin ARGB connector on the cable to a 5V 3-pin ARGB header on your motherboard. Ensure your motherboard supports ARGB control.
Troubleshooting
PC does not power on after installation.
Double-check that both ends of the CPU8PIN extension cable are fully and securely connected to the motherboard and the PSU cable. Ensure the ARGB connector is not preventing a proper power connection.
ARGB lighting is not working.
Verify that the 3-pin ARGB connector is plugged into the correct 5V 3-pin ARGB header on the motherboard. Ensure your motherboard's lighting software is enabled and configured correctly for the header used.
Cable connection feels loose or not fully seated.
Inspect the graphics card's proximity to the CPU 8-pin socket. If the graphics card casing is blocking a full insertion, you may need to use a different cable routing method or a different type of extension cable.
Intermittent power issues or system instability.
Ensure the 18AWG wire is not damaged and that the connection is firm. Loose connections can cause power delivery problems.
Pros and Cons
Pros
- Enhances PC aesthetics with ARGB lighting.
- 90° connector is space-saving and improves cable management.
- 18AWG wire provides reliable power delivery.
- Durable ABS construction ensures longevity.
- Closed interface design promotes a secure connection.
Cons
- Requires specific graphics card clearance (plastic not exceeding 6mm above power interface).
- May not be compatible with all graphics card designs due to the 90° angle.
- Requires careful installation to ensure a tight fit.
- ARGB functionality depends on motherboard support.
- Limited to CPU8PIN connection.
Setup, Compatibility & Care
Setup:
- Ensure your PC is powered off and unplugged.
- Connect the male 8-pin end of the extension cable to your power supply unit's CPU 8-pin cable.
- Connect the female 8-pin end of the extension cable to the CPU 8-pin socket on your motherboard.
- Crucially, check that the graphics card's casing does not interfere with the full insertion of the female 8-pin connector. The plastic of the graphics card should not be higher than the power interface by more than 6mm.
- If the graphics card casing is blocked, you must use alternative cable connection methods or consider a different cable.
- Connect the ARGB 3-pin header to the corresponding ARGB header on your motherboard for lighting effects.
Compatibility:
- Compatible with standard ATX, Micro-ATX, and Mini-ITX motherboards featuring a CPU 8-pin power connector.
- Requires a power supply unit with a CPU 8-pin (or 4+4 pin) output cable.
- ARGB functionality requires a motherboard with a 5V 3-pin ARGB header.
- Important Clearance Check: The graphics card's power connector housing must not exceed 6mm in height above the motherboard's CPU 8-pin socket to allow for a complete and secure connection.
Care:
- Keep the cable clean by gently wiping with a dry or slightly damp cloth. Avoid harsh chemicals.
- Ensure connections remain secure and free from dust buildup.