Johnstone's Ceiling Paint - White - 2.5L

A 2.5L can of Johnstone's Ceiling Paint will cover approximately 10 square meters per litre, so expect about 25 square meters of coverage.

The paint is touch-dry in 1-2 hours. However, allow for a longer time for complete drying, depending on the environmental conditions.

While this paint is suitable for most interior ceilings, ensure your bathroom has adequate ventilation to allow the paint to cure properly.

In most cases, priming isn't necessary, but if the ceiling is very porous or has significant stains, consider using a primer first.

Typically, two thin coats are recommended for the best coverage and finish. Allow the first coat to dry completely before applying the second.

Seal the can tightly and store it in a cool, dry place away from direct sunlight.

The paint is designed to be wiped clean with a damp cloth, but avoid scrubbing, as this may affect the finish.

Apply thinner coats and avoid overloading the roller or brush. Ensure you're not applying too much paint at once.

Apply a second coat after the first has dried. Ensure adequate drying time between coats.

Ensure you've used the product as directed; if the cracks reappear, it might indicate more significant structural issues that need addressing before repainting.