Shopping.co.uk

NVent ERIFLEX Flush-Mounted Unit With Distribution Terminals - 569020

NVent ERIFLEX Flush-Mounted Unit With Distribution Terminals - 569020

Nvent Eriflex built-in unit with distribution terminals, (WxDxH) 29x46x77mm, 1 pole, conductor cro...

Best current price£34.39from Tameson UK

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Tameson UK£34.39Visit shop

Nvent Eriflex Flush-Mounted Unit With Distribution Terminals - 569020

Visit shop

All Offers

2 offers from £34.39 - £65.28

View price history by clicking the chart icon.

Tameson UKNvent Eriflex Flush-Mounted Unit With Distribution Terminals - 569020
Free delivery in 1–3 days
£34.39
Visit shop
eBayUDJ-125A ERIFLEX UDJ 1-Pole 125A Blue Distribution Block
£13.20 delivery
£65.28
Visit shop

Used Offer

1 offer from £79.24

View price history by clicking the chart icon.

eBayERICO 569020 UDJ 125A Distribution Block 1 Pole
£13.20 delivery
£79.24
Visit shop

Product Information

Full details

This NVent ERIFLEX flush-mounted unit is designed for electricians and professionals in electrical installations who need a compact and reliable solution for power distribution. Its key benefit is efficient, single-pole power management within a confined space. A potential consideration is its compatibility with specific wire gauges and the requirement for proper installation within appropriate enclosures.

All features

Model Part NumberUDJ-125A
BrandnVent ERIFLEX

Extended Product Information

FAQs

What type of wire can I use with this distribution unit?

This NVent ERIFLEX unit is designed specifically for solid wires with cross-sections ranging from 2.5mm² to 16mm².

What is the maximum current this unit can handle?

The unit has a maximum rated current of 125A.

Is this unit suitable for outdoor use?

This unit is designed for indoor electrical installations. It should be housed within an appropriate insulated enclosure to protect it from the environment.

Can I use stranded wire with this distribution block?

No, this distribution block is designed only for solid wire conductors. Stranded wire is not compatible with the screw clamp terminals.

What are the physical dimensions of the unit?

The dimensions are 29mm (Width) x 46mm (Depth) x 77mm (Height).

How do I ensure a secure connection?

Ensure the solid wire is stripped to the appropriate length and inserted fully into the terminal before tightening the screw clamp firmly. Avoid overtightening.

Troubleshooting

Unit not making proper electrical contact

Verify that solid wire is used and within the specified 2.5-16mm² range. Ensure wire ends are stripped correctly and that screw clamps are tightened securely. Check for any debris inside the terminal.

Overheating during operation

Confirm that the connected load does not exceed the 125A maximum rated current. Check wire connections for tightness. Ensure adequate ventilation around the enclosure if applicable.

Difficulty mounting flush

Ensure the mounting location within the enclosure is prepared correctly according to the unit's dimensions (29x46x77mm). Check that no obstructions are present.

Pros and Cons

Pros

  • Efficient power distribution in a compact form factor.
  • Supports a good range of solid wire sizes.
  • Durable thermoplastic construction for longevity.
  • Secure screw clamp connections ensure reliable electrical contact.
  • Suitable for medium to high current applications up to 125A.

Cons

  • Limited to single-pole distribution.
  • Requires solid wire; stranded wire is not supported.
  • Installation requires appropriate enclosure and adherence to electrical codes.
  • Blue color may not fit all aesthetic requirements.
  • Specific dimensions necessitate careful planning for flush mounting.

Setup, Compatibility & Care

Setup:

  1. Ensure the power source is de-energized before installation.
  2. Select an appropriate, insulated enclosure for flush mounting.
  3. Strip the solid wire ends to the correct length for the screw clamp terminals.
  4. Insert the solid wires (2.5mm² to 16mm²) into the respective terminals.
  5. Tighten the screw clamps securely to ensure a solid connection. Do not overtighten.
  6. Mount the unit within the enclosure, ensuring it is flush and stable.

Compatibility:

  • Wire Type: Compatible only with solid wires ranging from 2.5mm² to 16mm².
  • Enclosure: Must be installed in a suitable, insulated enclosure compliant with local electrical codes.
  • Environment: Designed for indoor electrical installations.

Care:

  • Regularly inspect connections for tightness. (De-energize circuit first).
  • Keep the unit clean and free from dust and debris. Use a dry or slightly damp cloth if necessary. Avoid abrasive cleaners.
  • Ensure the surrounding enclosure remains in good condition.

Price History

DatePrice
Visit shop