Best current price£24.00from Amazon
Shopping.co.uk recommended and popular offers
Amazon£24.00Visit shop Chimsoc Red Ht Rubber Pipe Flashing - High Temperature Silicone - Suits 110-170Mm Diameter Pipes
Visit shop2 offers from £24.00
View price history by clicking the chart icon.
The Chimsoc High Temperature Pipe Flashing is an essential installation component for professionals and DIY enthusiasts managing roof penetrations for chimneys, exhaust vents, and flues. Designed specifically for wood-burning and multi-fuel stove systems, it provides a reliable, weather-tight seal that excels in extreme temperature environments, though it requires precise measurement of pipe diameters to ensure a proper fit within the 110-170mm range.
| Model Part Number | Cf6Htr |
|---|---|
| Brand | CHIMSOC |
Yes, it is suitable for various flue types including exhaust vents, provided the pipe diameter is between 110mm and 170mm.
It can withstand intermittent temperatures up to 260°C.
Yes, it is constructed from premium silicone designed to resist UV and ozone degradation.
You will typically need a utility knife for cutting the silicone, a caulk gun for high-temp sealant, and a drill/screwdriver for fasteners.
Installation hardware is not included, as requirements vary depending on your specific roofing material.
Yes, the flexible silicone base is designed to contour to most standard roof pitches.
Verify that the sealant bead underneath the flashing base is continuous and that all mounting screws are properly tightened.
This may indicate exposure to extreme chemicals or service life completion; inspect for cracks and replace the unit if the seal is compromised.
Do not stretch the silicone beyond its limits; use a different flashing model compatible with your specific pipe diameter.
To install, ensure the roof surface is clean, dry, and free of debris. Trim the silicone cone to the marked diameter that matches your pipe size (110-170mm). Apply a high-temperature silicone sealant to the underside of the 280mm x 280mm base and fasten it to the roof using compatible screws or rivets. Once installed, regularly inspect the flashing during annual chimney maintenance to ensure the silicone has not hardened or developed cracks due to extreme environmental weathering. Keep the area around the flashing clear of excessive debris like leaves or moss to prevent moisture buildup.
