Barrettine Polyurethane Varnish - Satin 1L

The varnish is touch-dry in approximately two hours and can be recoated after 12 hours, or overnight.

This varnish is suitable for use on bare or previously varnished wooden surfaces. It is ideal for internal doors and kitchen furniture.

No, this varnish is not suitable for use on painted surfaces.

For best results, apply two or three coats to improve the hardness and finish.

One litre of varnish provides coverage of up to 14m².

The wooden surface should be clean, dry, and free from any old varnish, wax, or grease. Lightly sand the surface if necessary.

Clean tools immediately after use with a suitable solvent.

Ensure the room temperature is within the recommended range and that the surface is clean and free of contaminants. Make sure that the varnish is not expired.

Use a high-quality brush or roller. Apply thin, even coats, and avoid over-brushing. Lightly sand between coats.

Ensure proper surface preparation. Lightly sand the surface before applying the varnish. Make sure to remove any old varnish or paint before applying.