Holesaw - 60mm - Abracs - THS60

The THS60 is designed for cutting steel, stainless steel, wood, and plastics.

The bi-metal construction with 8% cobalt enhances the strength, durability, and performance of the holesaw.

Use lower speeds for harder materials like steel and higher speeds for softer materials like wood or plastic.

Yes, it is recommended to use cutting oil or lubricant when cutting metal to reduce friction and extend the life of the holesaw.

Use a sharp holesaw, maintain consistent pressure, and use the correct speed for the material. Ensure the material is securely clamped.

Store the holesaw in a dry place after cleaning it to prevent rust and corrosion.

The pilot drill helps to center the holesaw and prevent it from wandering, ensuring a precise cut.

Avoid forcing the holesaw, use appropriate cutting oil when cutting metal, and clean the holesaw after each use to remove debris.

Check the cutting speed and pressure. Increase speed for softer materials and reduce it for harder materials. Ensure the blade is sharp and not damaged. Check the pilot drill is secure and centered.

Make sure the pilot drill is securely attached and the material is firmly clamped. Reduce the cutting pressure and ensure the holesaw is perpendicular to the surface.

Reduce cutting pressure and clear debris from the cut. Consider using cutting oil when working with metal.