Pyle 2-Way Dual Waterproof Off-Road Speakers - 4" 800W - PLUTV44BTR

Each speaker has a peak power handling of 400W, for a total of 800W when used as a pair.

They are rated IP-X5 marine-grade, meaning they are protected against low-pressure water jets projected from any direction. They are not designed for submersion.

The speakers come with a remote control specifically designed for managing the RGB LED lighting effects and colors.

Yes, they are designed for universal mounting on support bars, frames, roll bars, or roll cages commonly found on ATVs, UTVs, boats, and Jeeps.

The impedance of these speakers is 4 ohms.

The package typically includes the pair of speakers, mounting hardware, wiring, connectors, and a remote control for the RGB lights.

The frequency response is 85Hz to 20kHz, covering a wide range of audible sound.

Check all wire connections to the audio source and speakers. Ensure the amplifier (if used) is powered on and functioning. Verify the head unit volume is up and the correct audio source is selected.

Ensure the RGB control wires are properly connected. Check the battery in the remote control. Verify the power connection to the RGB module.

Ensure the speakers are receiving adequate power. Check for proper impedance matching with your amplifier. Reduce the volume slightly or consider an amplifier with more power if consistently pushing limits.

Inspect the speaker housing and mounting points for cracks or damage. Ensure all seals are intact and connections are tightened properly. Contact Pyle customer support if damage is found.