Best current price£4.68from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.68Visit shop A2 Stainless Steel Button Head Bolts Iso 7380 Hex Socket Allen Dome Head Screws M3 To M10 5056523231594
Visit shop
B&Q£8.78Visit shop B&Q - Hex Socket M3X16mm ( Pack Of: 5 ) Button Head Bolts Screws A2 304 Stainless Steel (Iso 7380) Fully Threaded
Visit shop20 offers from £4.68 - £9.78
View price history by clicking the chart icon.
This guide is for professionals and DIY enthusiasts needing robust fastening solutions for machinery, automotive, construction, and general projects. The SS8 M8x16mm bolts offer superior durability and corrosion resistance thanks to their A2 304 stainless steel construction, meeting ISO 7380 standards. A potential consideration is ensuring the correct size and thread pitch for your specific application, as these are M8 bolts.
| Colour | Silver |
|---|---|
| Model Part Number | M8X16mm |
| Brand | SS8 |
ISO 7380 specifies the dimensions and requirements for button head socket screws, ensuring these bolts meet established international quality and performance standards.
Yes, A2 304 stainless steel offers excellent resistance to corrosion and weathering, making them well-suited for outdoor applications.
The button head provides a low-profile, rounded finish that is aesthetically pleasing and reduces the risk of snagging compared to hex or pan heads.
Measure the diameter of the hole you need to fasten (M8 refers to the diameter) and the thickness of the materials being joined. The 16mm length should be sufficient to pass through the materials and allow for proper thread engagement.
While A2 stainless steel has good corrosion resistance, prolonged exposure to saltwater can still cause pitting or staining. For extreme marine conditions, A4 (316) stainless steel is often recommended.
You will need a hex key (Allen wrench) of the appropriate size for an M8 socket.
A2 304 stainless steel is generally considered non-magnetic or only slightly magnetic in its annealed state. Some magnetism may be introduced during the manufacturing process.
Verify you are using the correct M8 size bolt and that the corresponding tapped hole or nut has the correct thread pitch. Ensure the hole is clean and free of debris.
Confirm you are using an M8 hex key (Allen wrench). Ensure the socket is clear of any obstructions or damage.
Use a high-quality hex key that fits snugly. Apply steady, even pressure. If the head is already damaged, replacement of the bolt may be necessary.
While A2 stainless steel is highly resistant, extreme conditions or contact with dissimilar metals might cause surface staining. Clean with a soft cloth and mild soap. Ensure the bolt is not in constant contact with corrosive substances.
Setup: To install, ensure you have the correct size hex key (Allen wrench) for the M8 socket. Insert the bolt into the pre-drilled hole and tighten until snug. Avoid over-tightening, which could strip the threads or damage the material being fastened.
Compatibility: These bolts are M8 size with a specific thread pitch, conforming to ISO 7380 standards. Always verify that your application requires an M8 bolt with a compatible thread size and that the material can accept the bolt's length (16mm).
Care: Due to their stainless steel nature, minimal care is required. To maintain their appearance and function, periodically inspect for any debris. If cleaning is necessary, use a mild soap and water solution with a soft cloth. Avoid abrasive cleaners or harsh chemicals that could potentially scratch the surface or compromise the material's integrity.
