Welding Electrodes - Loops - 5Kg Pack

These E6013 electrodes are specifically designed for welding mild steel. They are not recommended for use on stainless steel, cast iron, or other alloy steels.

Yes, these E6013 electrodes are designed to work with both AC and DC welding power sources.

The recommended welding current range for these Ø4 x 350mm electrodes is between 130A and 190A.

Yes, these electrodes are rated for all-position welding, including flat, horizontal, vertical, and overhead.

Store the electrodes in a dry, sealed container to prevent moisture absorption. Avoid storing in damp or humid environments.

E6013 is a classification for arc welding electrodes. It indicates a tensile strength of 60,000 psi, suitable for AC or DC currents, and a coating that allows for all-position welding with a smooth arc and good slag detachability.

Each electrode in this pack measures Ø4mm in diameter and 350mm in length.

Ensure the electrode tip is clean and in firm contact with the workpiece. Verify the welding current is within the recommended range (130-190A).

Check for moisture in the electrodes; try re-baking if necessary. Ensure proper grounding of the workpiece and electrode holder.

Adjust welding angle, travel speed, and arc length. Ensure the welding current is set correctly for the material thickness and position.

Increase travel speed slightly or slightly decrease welding current. Ensure the correct arc length is maintained.