Clean Pro Antibacterial & Disinfectant Spray - Pro Clean - 232935

Dilution ratios vary depending on the intended use. Always refer to the product label for specific instructions. Typically, a small amount of concentrate is mixed with a larger volume of water in a spray bottle or bucket.

Yes, the Clean Pro Antibacterial & Disinfectant Spray is food-safe once diluted and used as directed for disinfecting food contact surfaces. Ensure surfaces are rinsed with potable water after disinfection if required by local regulations.

It is suitable for most hard, non-porous surfaces such as countertops, floors, walls, and equipment. Avoid using on porous materials or surfaces that may be damaged by liquids. Always test in an inconspicuous area first.

It is recommended to wear gloves and ensure good ventilation when handling and using the concentrated product or its diluted solutions, especially for prolonged cleaning tasks.

Please refer to the expiration date printed on the product packaging. Proper storage in a cool, dry place will help maintain its efficacy.

No, it is not recommended to mix Clean Pro Antibacterial & Disinfectant Spray with other cleaning chemicals, as this can create hazardous reactions or reduce its effectiveness.

Ensure the product has been diluted correctly according to the instructions. Check the expiration date of the product.

Rinse the surface thoroughly with clean water after disinfection. Ensure the dilution ratio is correct, as too much concentrate can leave residue.

Ensure adequate ventilation during and after use. The odor should dissipate as the product dries.

This may occur if stored at very low temperatures. Allow the product to return to room temperature; it should clear. If the issue persists, contact customer support.