Galvanised Thimbles To BS464 - 44MM - 2 Pack
Best current price£60.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£60.00Visit shop B&Q - X2 44mm Galvanised Thimbles To Bs464Lifting Heavy Duty Galv 1 12/16 Inch
Visit shopB&Q£60.00Visit shop All Offers
3 offers from £60.00
View price history by clicking the chart icon.
B&QB&Q - X2 44mm Galvanised Thimbles To Bs464Lifting Heavy Duty Galv 1 12/16 Inch
Free delivery in 1–3 days
£60.00
Visit shop
eBayX2 44MM Galvanised Thimbles To BS464 - Lifting Heavy Duty Galv Strong Loop Inch
Free delivery in 1–3 days
£60.00
Visit shop
OnBuy.comX2 44Mm Galvanised Thimbles To Bs464 - Lifting Heavy Duty Galv 1 12/16 Inch 600988489844
Free delivery in 1–3 days
£60.00
Visit shop
Product Information
Full details
This guide is for individuals and professionals who need to create strong, wear-resistant loops in wire rope for lifting or general use. The key benefit is enhanced durability and safety for wire rope terminations. A caveat is that they are specifically designed for wire rope and may not be suitable for other cable types. These heavy-duty, galvanized steel thimbles conform to BS464 standards, providing essential protection against abrasion and crushing at the rope's eye, ensuring longevity and load-bearing integrity.
All features
| Model Part Number | SFBST44 |
|---|---|
| Brand | SecureFix Direct |
Extended Product Information
FAQs
What does BS464 refer to?
BS464 is a British Standard that specifies requirements for wire rope thimbles, particularly those used in lifting applications. It ensures a certain level of quality, material, and dimensional accuracy.
Can these thimbles be used for any type of rope?
These thimbles are specifically designed for wire rope of the corresponding diameter (44mm). They are not intended for use with synthetic ropes, chains, or other types of cables.
How do I know if I need a 44mm thimble?
You need a 44mm thimble if you are creating a loop in a wire rope that has a nominal diameter of 44mm. Always match the thimble size to the wire rope diameter for optimal fit and protection.
What is the benefit of galvanized steel?
Galvanized steel is coated with zinc, which provides a sacrificial layer of protection against rust and corrosion, making the thimble more durable, especially in outdoor or damp environments.
How many thimbles are included in a pack?
Each pack contains two (2) wire rope thimbles.
Can I use these for non-lifting applications?
Yes, while they are suitable for lifting applications due to their heavy-duty nature and BS464 compliance, they can also be used for any application requiring a strong, protected loop in a 44mm wire rope, such as rigging, securing, or creating eyelets.
How often should I inspect my wire rope and thimbles?
It is recommended to inspect wire ropes and associated fittings like thimbles regularly, especially before each use or at set intervals depending on the frequency and severity of use. Look for signs of wear, corrosion, kinks, or deformation.
Troubleshooting
Thimble does not fit the wire rope loop properly.
Ensure you are using a 44mm wire rope and that the loop is formed correctly. The thimble should fit snugly. If the rope is smaller, a different size thimble may be needed. If the loop is too large, it may require re-forming.
Wire rope clips do not secure the loop effectively.
Verify that you are using the correct type and number of wire rope clips for the 44mm wire rope. Ensure they are installed in the correct orientation (U-bolt on the dead end of the rope) and tightened evenly to the manufacturer's recommended torque.
Visible rust or corrosion on the thimble.
Light surface rust can be gently brushed away. If corrosion is severe, compromising the structural integrity, the thimble should be replaced immediately, especially for lifting applications.
Thimble appears deformed after use.
This may indicate the thimble was subjected to a load exceeding its rating or was not installed correctly, leading to improper load distribution. Inspect for damage and replace if deformed. Ensure proper installation for future use.
Pros and Cons
Pros
- Provides superior protection to wire rope loops against wear and crushing.
- Galvanized finish offers good resistance to rust and corrosion.
- Meets BS464 standard, indicating a level of quality assurance for lifting applications.
- Heavy-duty design makes them suitable for demanding and high-load tasks.
- Comes in a convenient 2-pack for immediate use or replacement.
Cons
- Specific size (44mm) means they are only compatible with wire rope of that particular diameter.
- Primarily designed for wire rope; may not be suitable for synthetic ropes or other cable types.
- Requires proper installation to ensure effective protection and load bearing.
- Galvanized coating can eventually wear down in highly abrasive environments.
- Only available in a 2-pack, which might be too many or too few for some users.
Setup, Compatibility & Care
Setup: To install, form a loop in the wire rope of the appropriate diameter (44mm). Insert the thimble into the bight of the loop, ensuring it sits snugly within the curve. Secure the loop around the thimble using appropriate wire rope clips (also known as U-bolts or clamps), spaced correctly according to industry standards and the number of clips recommended for the wire rope size. Ensure clips are tightened evenly and in the correct orientation.
Compatibility: These thimbles are specifically designed for 44mm galvanized or stainless steel wire rope. They are intended for use with hardware such as shackles, eye bolts, and hooks that are compatible with the loop size created. They are not recommended for synthetic ropes or cables not designed for this type of termination.
Care: Inspect the thimbles regularly for signs of wear, damage, or corrosion. Clean with a dry cloth to remove dirt or grease. For prolonged use in harsh environments, occasional checks for rust are recommended. Ensure wire rope clips remain tight and re-tighten if necessary. Store in a dry place when not in use.