Rotabor Cutter - 16mm x 50mm

This Rotabor Cutter is expertly crafted from high-speed steel M2 (HSS M2) for enhanced durability and cutting efficiency.

This particular model offers a cutting depth of 50mm.

It features a universal 19mm Weldon shank, ensuring broad compatibility with many magnetic drills.

This cutter is designed primarily for use with magnetic drills that can accommodate a 19mm Weldon shank. It is not typically used with standard handheld drills.

The diameter of this Rotabor Cutter is 16mm.

Yes, using a suitable cutting lubricant is highly recommended. It helps reduce heat, prolongs the life of the cutter, and results in a cleaner cut.

After each use, clean the cutter to remove metal chips and lubricant. Store it in a dry environment, preferably in a protective case, to prevent rust and damage.

Ensure sufficient cutting lubricant is used and the drill speed is appropriate for the material. Check if the cutting edge is dull and requires sharpening or replacement.

Increase the amount of cutting lubricant applied. Reduce the feed rate and ensure the drill is not being forced. Check for any debris buildup on the cutter.

Verify the cutter is sharp and undamaged. Ensure the magnetic drill is stable and the workpiece is securely clamped if necessary. Use a pilot hole if drilling very thick material.

Confirm that the drill chuck is designed for a 19mm Weldon shank. Ensure the chuck is clean and free of debris.