Glass Drill Bit - SupaTool - 5mm - Silver
Best current price£7.60from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.60Visit shop - Supatool Gl Drill Bit Silver (5mm)
Visit shopB&Q£7.60Visit shop All Offers
3 offers from £7.60 - £14.19
View price history by clicking the chart icon.
OnBuy.com(5Mm, Silver) Supatool Glass Drill Bit 5059444089862
Free delivery in 1–3 days
£14.19
Visit shop
Product Information
Full details
This 5mm SupaTool Glass Drill Bit is designed for DIY enthusiasts and professionals needing to create precise pilot holes in challenging materials like glass, tiles, and porcelain. Its key benefit is the precision diamond-ground tip, ensuring accurate drilling with minimal chipping. A potential caveat is the need for careful speed control and cooling to prevent overheating and ensure longevity.
All features
| Brand | SupaTool |
|---|
Extended Product Information
FAQs
What is the best speed to use this drill bit?
It is best to use this drill bit at a slow speed, typically between 200-300 RPM, especially when drilling into glass or porcelain to prevent overheating and chipping.
Can I use this bit for drilling metal?
No, this drill bit is specifically designed for glass, tiles, and porcelain. It is not suitable for drilling metal.
How do I keep the bit cool?
You can keep the bit cool by applying a small amount of water or a specialized cutting lubricant to the drilling area. A slow speed also helps manage heat.
What kind of drill is required?
This bit is compatible with standard corded and cordless drills equipped with a 3-jaw chuck. A variable speed drill is recommended for optimal control.
How do I prevent chipping when drilling glass?
Start at a very slow speed to create a shallow mark, use steady, light pressure, and ensure adequate cooling. Securing the glass and using a drilling template can also help.
What is the shank type?
This bit features a flute-less straight shank, designed for a secure grip in standard drill chucks.
Troubleshooting
Drill bit is not cutting effectively.
Ensure the drill is set to a low RPM. Increase pressure slightly, or check if the bit tip is worn. For glass and tile, ensure adequate cooling with water or lubricant.
Bit is overheating.
Immediately stop drilling and allow the bit to cool. Reduce drilling speed and apply more cooling lubricant (water or specialized cutting fluid).
Material (glass/tile) is chipping excessively.
Start drilling at a very slow speed to create a small indentation before drilling through. Apply lighter pressure and ensure the material is stable. Check if the bit tip is damaged.
Bit wanders on initial contact.
Use a center punch or a piece of tape to create a starting point. Start drilling at an extremely slow speed until a small divot is formed, then proceed normally.
Pros and Cons
Pros
- Achieves precise pilot holes in glass and tile.
- Durable tungsten carbide tip for longevity.
- Stable shank design prevents slipping.
- Reduces chipping and breakage of delicate materials.
Cons
- Requires a slow speed and cooling to prevent overheating.
- Not suitable for masonry or metal.
- Can be slower than specialized tile bits on very hard surfaces.
- Requires a steady hand and consistent pressure.
Setup, Compatibility & Care
Setup:
- Securely insert the 5mm drill bit into the chuck of your drill.
- Ensure the drill is set to a low speed setting.
- If drilling into glass or tile, mark your desired location.
- Consider using a drilling guide or tape to prevent the bit from wandering on initial contact.
Compatibility:
- Compatible with all standard corded and cordless drills with a 3-jaw chuck.
- Intended for use on glass, tiles (ceramic, porcelain), and soft stone.
- Not recommended for use on metal, wood, or masonry.
Care:
- After each use, clean the bit by wiping away dust and debris.
- If used with lubricant, wash the bit with soap and water and dry thoroughly.
- Store in a dry place to prevent corrosion.