Best current price£8.06from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£8.06Visit shop Securplumb Compression Swept Tee 5063884362348
Visit shop
B&Q£8.24Visit shop - Securplumb Compression Swept Tee White (32mm)
Visit shop3 offers from £8.06 - £10.00
View price history by clicking the chart icon.
The Securplumb Compression Swept Tee (32mm) is an essential component for professional plumbers and DIY enthusiasts alike, designed to provide a reliable, leakproof junction in waste water drainage systems. Its primary benefit is the combination of a high-quality compression seal with integrated rubber gaskets, which simplifies assembly while ensuring long-term durability. While it is engineered for ease of use, users should note that as a 32mm specific component, it is strictly intended for standard waste pipe diameters and must be installed with clean, burr-free pipe ends to maintain its integrity.
| Model Part Number | UTST12149_2 |
|---|---|
| Brand | Securplumb |
No, this component is designed for waste water drainage systems and is not pressure-rated for supply lines.
No, this is a mechanical compression fitting and should not be used with solvent cement.
The 32mm measurement refers to the standard outer diameter of the waste pipe it is designed to fit.
Yes, as long as the internal rubber seal remains intact and the threads are not stripped, the fitting can be disassembled and reused.
Usually, only your hands are required. If the fitting is in a tight space, a basin wrench may assist in tightening, but take care not to overtighten.
While the material is durable, it is primarily intended for indoor plumbing systems. Prolonged exposure to direct UV light may cause the plastic to become brittle over many years.
Ensure the pipe end is free of burrs and is pushed fully into the fitting. Verify that the rubber seal is seated correctly and not pinched.
Check the threads for plastic shavings or debris. Back off the nut and try threading it again manually to ensure it is not cross-threaded.
The pipe may not be inserted deep enough to engage the compression grip. Ensure it is pushed past the seal until it hits the interior pipe stop.
Setup Instructions:
Compatibility:
This fitting is compatible with standard 32mm OD (Outer Diameter) solvent weld or push-fit waste pipes. Always verify the external diameter of your pipe before installation.
Care:
To maintain the seal, periodically check the nuts for tightness. Avoid using harsh caustic chemicals in high concentrations, which could degrade the rubber gaskets over an extended period.
