Shopping.co.uk

Salamander Pumps Shower Pump - RP120SU

Not AvailableSalamander Pumps Shower Pump - RP120SU

The RP120SU Right Shower Pump Replaces the ESP120 CPV, ESP120CPV. The RP range of pumps from Salam...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Salamander Pumps RP120SU is a premium 3.6 bar single-ended shower pump designed for homeowners seeking enhanced water pressure and flow efficiency in gravity-fed systems. It offers a significant boost to hot and/or cold water supplies for showers, taps, and whole-house applications, operating at exceptionally low noise levels. A potential caveat is its suitability for gravity-fed systems, requiring specific installation considerations.

All features

Model Part NumberRP120SU
BrandSalamander Pumps

Extended Product Information

FAQs

What type of plumbing system is the RP120SU suitable for?

The RP120SU is designed for gravity-fed systems. It is available in both positive head and universal (negative head) configurations to suit different installations within a gravity-fed setup.

How does the crossover technology benefit me?

Crossover technology allows pumps that were previously designed only for boosting showers to now be used to boost the water supply for the entire house, providing consistent pressure across all outlets.

Is this pump suitable for whole-house water pressure boosting?

Yes, with its crossover technology, the RP120SU can boost hot and/or cold water supplies to the entire house, not just individual showers or taps.

How quiet is the RP120SU compared to other pumps?

The RP120SU is one of the quietest shower pumps on the market, operating at noise levels as low as 45.5dBA, independently tested against competitors.

What is the pressure rating of this pump?

The Salamander RP120SU is a 3.6 bar shower pump, providing substantial pressure for enhanced water flow.

Can this pump be used with any type of shower valve?

Yes, it is suitable for boosting supplies to both thermostatic and manual mixer shower valves, as well as various shower types and heads.

What maintenance does the RP120SU require?

The pump requires minimal user maintenance. Exterior cleaning with a damp cloth is recommended. Internal maintenance should only be performed by a qualified professional.

Troubleshooting

Pump does not start

Check the electrical supply and ensure the pump is receiving power. Verify that the system has positive head pressure (if applicable) or that the system is correctly configured for a universal (negative head) installation.

Low water pressure or flow

Ensure the pump is correctly primed and that there are no blockages in the pump's inlet or outlet. Check that all system valves are fully open and that the system meets the minimum flow requirements for the pump.

Pump is excessively noisy

Check for air in the system; the pump may be running dry. Ensure all connections are tight to prevent air ingress. If noise persists, contact a qualified installer.

Pump cycles on and off intermittently

This could indicate a pressure switch issue or an air leak in the system. Inspect for leaks and consult the installation manual or a professional.

Pros and Cons

Pros

  • Extremely quiet operation, among the quietest on the market.
  • Provides powerful water pressure boosting for showers and whole-house applications.
  • Improved reliability and durability due to re-engineered design and strengthened components.
  • Versatile crossover technology enables whole-house water boosting.
  • Suitable for various shower types and tap systems.

Cons

  • Primarily designed for gravity-fed systems; specific installation is crucial.
  • As a premium product, it may represent a higher initial investment.
  • Requires proper installation by a qualified professional to ensure optimal performance and safety.

Setup, Compatibility & Care

Setup:

  1. Installation: The RP120SU is designed for gravity-fed systems. It can be installed as a positive head or universal (negative head) pump. Professional installation by a qualified plumber is highly recommended to ensure correct connections and system integrity.
  2. Connections: Ensure all pipework connections are secure and leak-free.
  3. Power: Connect to a suitable, protected electrical supply as per local regulations.

Compatibility:

  • System Type: Ideal for gravity-fed systems.
  • Water Type: Suitable for boosting hot and/or cold water supplies.
  • Application: Compatible with thermostatic or manual mixer shower valves, individual taps, cisterns, and whole-house applications.
  • Shower Heads: Works with a wide range of shower types and heads, including those with massage functions or champagne spray.

Care:

  • Cleaning: The exterior of the pump can be cleaned with a soft, damp cloth. Avoid abrasive cleaners.
  • Maintenance: Regularly check for any unusual noises or vibrations. Ensure the pump's location is free from excessive dust or debris. No user-serviceable parts inside; refer to professional servicing if issues arise.