Legrand 1-Phase Transformer - 160VA

This Legrand 044214 is specifically designed as a safety transformer to reduce 230V AC to 24V AC, ensuring electrical safety in relevant applications.

The transformer has a capacity of 160VA (Volt-Amperes) for the secondary (24V) output.

No, it is specifically designed as a safety transformer with a fixed 230V input and 24V output. It is not intended for general-purpose power conversion or different voltage combinations.

It can be mounted on standard DIN rails. It fits 7.5mm DIN rails directly or 15mm DIN rails with the use of mounting plates.

The electrostatic screen provides an additional layer of electrical isolation and protection, enhancing the safety of the transformer and the connected circuit.

This transformer conforms to the EC standard EN 61558-2-6.

The transformer includes a coupling strip that allows for quick and secure connections between the zero and ground lines on the secondary side.

Verify that the primary 230V input is correctly connected and live. Check that the output connections are secure and that the transformer has not been overloaded beyond its 160VA rating.

Ensure the transformer is adequately ventilated and not installed in an enclosed space without airflow. Check if the load connected to the 24V output exceeds the 160VA capacity.

Inspect all wiring connections, both primary and secondary, for looseness or damage. Ensure the DIN rail mounting is secure.