Fablon Scrap Wood Roll - Multicolor

It can be applied to most smooth, flat, and clean surfaces, including shelves, drawers, cabinets, tables, and walls. It works best on sealed wood, laminate, metal, and glass.

Basic tools like a measuring tape, scissors or a craft knife, and a soft cloth or squeegee are recommended for a smooth and precise application.

It can be used on kitchen cabinets or drawers. However, it's not recommended for areas with high moisture or direct water contact, and avoid placing hot items directly on the surface.

Gently peel the plastic from the edge. If it's difficult, you can warm it slightly with a hairdryer on a low setting to soften the adhesive, then peel slowly. Some residue may remain, which can be cleaned with an appropriate adhesive remover.

The design aims to replicate a scrap wood aesthetic, offering a decorative finish. The visual realism can depend on the lighting and surrounding decor.

The product weighs approximately 0.35 Pounds.

Gently lift the affected section of the plastic and reapply, smoothing it down slowly with a soft cloth or squeegee. For small bubbles, you can try pricking them with a fine needle and smoothing the air out.

Ensure the surface is thoroughly cleaned, dried, and free from dust or grease. For difficult surfaces, a light sanding may improve adhesion, but ensure it is smooth afterward.

Use a sharp craft knife or a precision cutting tool and a metal ruler for straight edges. A cutting mat can also help protect your work surface.

Depending on the surface and how long the plastic was applied, residue can occur. Try removing it with a mild adhesive remover or a solution of warm water and dish soap, applied with a soft cloth. Test in an inconspicuous area first.