General Packaging Aerosol Spray Paint - Grey

Drying times can vary based on temperature, humidity, and application thickness. Generally, it is touch-dry within 15-30 minutes and fully cured within 24 hours.

While it can be used on some plastics, it is recommended to test on a small, inconspicuous area first. For best results on plastics, a specific plastic primer may be beneficial.

After use, turn the can upside down and spray for a few seconds to clear the nozzle. If it remains blocked, a fine needle can be used carefully to clear the opening. Do not puncture the can.

This paint is designed for general interior and exterior use and is not specifically formulated for high-heat applications. For high-heat areas, a specialized high-temperature paint is recommended.

Coverage varies depending on the surface porosity and application technique. A 400ml can typically covers approximately 1-2 square meters (10-20 square feet) with a single coat.

Yes, you can paint over existing paint, provided the old paint is sound and the surface is properly prepared (clean, dry, and lightly abraded if necessary for adhesion).

Shake the can more vigorously for a longer period. Ensure the nozzle is not blocked. If blockage persists, try cleaning it with a fine needle or replacing the can.

Ensure the surface was properly prepared (clean, dry, free of grease/rust) and that adequate drying time was allowed between coats. The surface may be incompatible; test on a small area first.

Applied coats were too thick. Reduce the amount of paint applied per coat and increase the distance from the surface. Allow adequate drying time between coats.

Ensure even application distance and speed. Metallic particles can settle; shake can frequently during use. Apply in good lighting conditions.