Timco Cavity Wall Anchors - ZIP6

These anchors are designed for use with plasterboards, most hollow concrete blocks, cavity walls, and ceilings.

The required drill bit size is indicated on the product packaging. Always refer to the packaging for the most accurate information.

These anchors are designed for indoor use. Exposure to the elements may compromise their performance.

The weight capacity varies depending on the wall material and the screw used. Please refer to the product packaging for specific load ratings.

The nylon arms are for installation purposes only. Once the fixing is in place, the anchor becomes an all-steel fixing.

If the screw is too short, you will need to use a longer screw that is compatible with the anchor and the fixture you are mounting.

Yes, these anchors conform to BS 7671 standard's 18th edition, which relates to fire safety.

Ensure the drilled hole is the correct size. If it's too large, try using a slightly larger anchor or filling the hole with an appropriate filler before reinserting the anchor.

Make sure the screw is properly engaging with the anchor. If the screw is too short, use a longer one. If the anchor is damaged, replace it.

Verify the weight capacity of the anchor is sufficient for the item being mounted. Ensure the anchor is fully engaged within the wall and that it is installed correctly.