Flomasta Undersink Surface-Mounted Manual Stored Water Heater - 10L

The Flomasta 10L undersink water heater can heat water up to a maximum temperature of 65°C.

The heat-up time is fast due to effective insulation and a 2KW heating element, providing hot water consistently. Specific times vary based on the initial water temperature and desired temperature setting.

This unit is designed for indoor undersink installation and should not be exposed to freezing temperatures or direct weather elements.

While basic plumbing can be managed by a competent DIYer, the electrical connection should ideally be performed by a qualified electrician to ensure safety and compliance.

Regular care involves external cleaning with a damp cloth and periodic checks of plumbing connections. Professional inspection annually is recommended for optimal performance and safety.

The Flomasta 10L features a manual thermostat dial for temperature adjustment.

Please refer to the manufacturer's documentation or the retailer's information for the specific warranty period.

Ensure the unit is properly connected to the power supply and the circuit breaker is not tripped. Check that the thermostat is set to a desired temperature and the unit has had sufficient time to heat. Verify that the unit is full of water.

Check the thermostat setting and increase it if necessary. Allow more time for the water to heat, especially after prolonged use or if the ambient temperature is very low. Ensure the heating element is functioning correctly.

Immediately turn off the power and water supply. Check all plumbing connections for tightness. If the leak persists, contact a qualified technician as the unit may be damaged.

Strange noises can sometimes indicate sediment buildup. If the noise is significant or concerning, it is recommended to have the unit inspected by a qualified technician.