Foam Applicator Gun - Loops

Immediately after use, attach a can of PU foam cleaner or a compatible cleaning agent, and dispense it through the nozzle until clear foam/solvent exits. Wipe down the exterior with a damp cloth. Refer to the 'Care' section for detailed steps.

This applicator gun is designed specifically for 'gun-grade' expanding polyurethane foam canisters that come with a threaded adapter for applicator guns.

Yes, it is recommended to store the gun with a partially used foam canister attached. This helps keep the internal mechanism primed and prevents the valve from drying out. Ensure the nozzle is clean before storage.

It is crucial to clean the gun immediately after each use. For storage, ensure the nozzle is thoroughly cleaned to prevent blockages. Regular maintenance is key to longevity.

The Teflon coating on the nozzle prevents the expanding foam from adhering to it. This makes the foam much easier to remove during cleaning and significantly reduces the risk of clogs.

While it's heavy-duty, the precise application control makes it suitable for detailed DIY tasks. For very small jobs, the 200ml capacity might be more than needed, but it offers superior control compared to straw-based cans.

Ensure the foam canister is adequately shaken. Check that the canister is screwed on tightly and that the nozzle is not clogged. Try flushing the nozzle with cleaner.

Check the seal between the foam canister and the applicator gun. Ensure it is securely tightened. If the leak persists, the internal valve may need servicing or replacement.

Attempt to clean with a dedicated PU foam cleaner. If deeply Clogged, the nozzle may need to be replaced. Preventative cleaning after each use is crucial.

The trigger mechanism may be gummed up with dried foam. Thoroughly clean the nozzle and adapter area. If the trigger itself is stiff, try applying a small amount of lubricant to the pivot point (ensure it is compatible with foam application).