d-c-fix Romeo - Matt White Marble

It is best applied to smooth, non-porous surfaces. If the wallpaper is perfectly smooth and adheres well, it might work, but textured wallpaper will show through and prevent proper adhesion. Test in a small, hidden area first.

With proper application on a suitable surface and regular care, the adhesive is designed to provide a long-lasting bond for several years.

The vinyl film itself is water-resistant, making it suitable for kitchens and bathrooms. However, it's important to ensure that seams are properly sealed to prevent moisture from seeping underneath.

Yes, you can carefully lift and reposition the film shortly after application. However, the longer it's applied, the stronger the bond becomes, making repositioning more difficult.

Each roll measures 2.1 meters in length and 90 centimeters in width.

It is not recommended for use in areas exposed to high heat, as excessive temperatures can damage the film and weaken the adhesive. Keep it away from direct heat sources.

Clean with a soft, damp cloth. For tougher marks, use a mild soap solution and wipe clean. Avoid abrasive materials.

Gently lift the film back to the point of the bubble and reapply, smoothing it out with a squeegee or cloth. For small bubbles, puncturing with a fine needle may help release trapped air.

Ensure the surface is clean, dry, and smooth. Re-clean the surface and try applying again, pressing firmly, especially on edges. For some surfaces, a light application of a spray adhesive might be needed, but test in an inconspicuous area first.

Use a very sharp craft knife or utility blade. A metal ruler can help guide the blade for a straight cut.

Use a gentle adhesive remover or warm soapy water. Test the remover in an inconspicuous area first to ensure it does not damage the underlying surface.