Bradstone Natural Sandstone Red Block Paving - L200mm W134mm T50mm

Each pack contains 750 blocks and covers approximately 9.05 square meters.

Each block measures approximately 200mm in length, 134mm in width, and 50mm in thickness.

These pavers are primarily designed for patios and pathways. For driveway use, a thicker paver and a more robust sub-base would typically be required. Consult with a landscaping professional for suitability.

The weathered finish is inherent to the stone. Regular cleaning with water and a soft brush is recommended. Avoid abrasive cleaners or pressure washing which could alter the surface texture.

Natural sandstone is generally frost-resistant when installed correctly on a well-drained base. Ensure proper installation to prevent waterlogging, which can lead to frost damage.

Yes, these pavers are designed to be used with other natural sandstone paving products to create cohesive and varied designs.

For oil stains, act quickly. Absorb as much as possible with dry rags or sawdust. Then, use a specialized stone degreaser following the manufacturer's instructions. Always test in an inconspicuous area first.

Check the base preparation for stability and levelness. Re-lay affected blocks on a properly compacted sand bed, ensuring consistent depth.

Ensure joints are completely filled with kiln-dried sand or appropriate jointing compound. Re-apply if necessary. Consider using a weed-inhibiting jointing compound.

Natural sandstone exhibits inherent color variations. This is normal and contributes to the authentic look. Mix blocks from different packs during installation to achieve a blended appearance.

This is a natural phenomenon in some mineral-based materials. It usually weathers away over time. If persistent, consult product-specific cleaning advice for mineral efflorescence.