Kyocera Wireless LAN Interface - IB-37
Best current price£87.34from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
PCHUB.UK£87.34Visit shop Kyocera Ib-37 Printer/Scanner Spare Part Wlan Interface 1 Pc(S)
Visit shopPCHUB.UK£87.34Visit shop All Offers
2 offers from £87.34 - £104.81
View price history by clicking the chart icon.
PCHUB.UKKyocera Ib-37 Printer/Scanner Spare Part Wlan Interface 1 Pc(S)
Free delivery in 1–3 days
£87.34
Visit shop
GamingKitKyocera Ib-37 Printer/Scanner Spare Part Wlan Interface 1 Pc(S)
Free delivery in 1–3 days
£104.81
Visit shop
Product Information
Full details
The Kyocera IB-37 is a high-performance wireless LAN interface board designed for IT administrators and office managers looking to integrate compatible Kyocera ECOSYS printers and scanners into a wireless network environment. This board provides robust multi-band Wi-Fi support, enabling flexible placement of devices throughout an office without the constraints of Ethernet cabling. Please note that installation requires opening the device chassis, so users should ensure they are comfortable with hardware upgrades or have technical assistance available.
All features
| Model Part Number | IB-37 |
|---|---|
| Brand | Kyocera |
Extended Product Information
FAQs
Does the IB-37 support Wi-Fi security protocols?
Yes, it supports standard enterprise-grade security protocols consistent with Kyocera printer specifications.
Can I install this in an older non-ECOSYS model?
No, this board is specifically designed for the ECOSYS and TASKalfa series listed in the compatibility guide.
What is the difference between IB-37 and IB-38?
The IB-37 supports both 2.4 GHz and 5 GHz multi-band connections, whereas the IB-38 is limited to 2.4 GHz.
Do I need to install drivers after inserting the board?
Typically, the printer recognizes the hardware immediately, but you may need to update the printer's firmware to ensure full compatibility.
Is this a plug-and-play installation?
It is physical plug-and-play, but you must configure the network credentials through the printer's interface.
Troubleshooting
Printer not detecting the wireless board
Power down the unit, remove the board, and ensure it is fully seated in the expansion slot before restarting.
Cannot connect to the 5 GHz Wi-Fi network
Verify that your office router is broadcasting on the 5 GHz frequency and that the printer network settings are correctly configured for that band.
Intermittent connection drops
Check for signal interference from other electronics or move the printer closer to the wireless access point.
Pros and Cons
Pros
- Supports both 2.4 GHz and 5 GHz frequency bands
- Tailor-made for Kyocera ECOSYS and TASKalfa printer lines
- Enables cleaner office setups by reducing cable clutter
- Provides reliable, enterprise-grade wireless connectivity
Cons
- Requires manual installation into the printer chassis
- Compatible only with specific Kyocera models
- Requires a basic understanding of printer network settings
Setup, Compatibility & Care
Before starting the installation, ensure that the printer is powered off and unplugged from the power source. The IB-37 is compatible with specific models including the ECOSYS PA6000x, PA5500x, PA5000x, PA4500x, MA6000ifx, MA5500ifx, MA4500ifx, MA4500ix, MA4500fx, MA4500x, as well as the TASKalfa MZ4000i and MZ3200i. To install, remove the designated expansion slot cover on the back of the printer, slide the card into the slot until it locks securely, and secure any provided screws. After physical installation, turn the printer on and navigate to the Network Settings menu to configure your Wi-Fi SSID and password. Always handle the board by its edges to avoid static discharge or damage to the delicate circuitry.