DrayTek VigorSwitch P1282 - 24-Port PoE

Press and hold the reset button on the front of the switch for about 10 seconds. The switch will restart with the default settings.

The warranty period is typically two years from the date of purchase. Please check your local region for the exact terms.

Yes, you can manage the switch remotely through the VigorACS cloud management platform or a DrayTek Vigor router.

The switch supports Gigabit SFP modules. Ensure the modules are compatible with your fiber cabling type (e.g., single-mode or multi-mode).

Access the web interface and navigate to the VLAN configuration section. You can then create and assign VLANs to specific ports or configure VLANs for voice and surveillance.

The switch has a 400-watt PoE power budget.

Yes, the switch supports QoS to prioritize network traffic and improve performance for critical applications.

Check the power cable and ensure it's securely connected to both the switch and a working power outlet. Verify the power source.

Check the Ethernet cables and make sure they are properly connected. Verify the IP address settings on your devices and the switch.

Check the PoE settings in the switch's web interface. Ensure PoE is enabled on the corresponding port and that the connected device meets the power requirements.

Check the cables and ensure they are Cat5e or Cat6 cables. Check VLAN configuration and QoS settings.

Make sure your device is on the same network as the switch. Try using the default IP address (refer to the documentation) and ensure the correct network configuration on your device.