Rycote Lavalier Windjammer - White

Its primary purpose is to reduce wind noise and clothing rustle for lavalier microphones when used outdoors or in environments with air movement.

No, it is specifically designed for lavalier microphones that use standard foam windscreens. It should fit snugly over these foams.

It significantly reduces moderate wind noise. For extremely high winds, additional protection might be necessary, but this windjammer provides a substantial improvement over a bare mic or just foam.

When fitted correctly, it maintains good acoustic transparency, meaning it blocks wind effectively without significantly muffling or altering the microphone's intended sound.

You can clean it gently with a slightly damp cloth. Ensure it is completely air-dried before re-use.

The white color is often chosen for aesthetic reasons, as it can be less visible against lighter clothing or in certain filming contexts compared to black.

MPN stands for Manufacturer Part Number. In this case, 065516 is the Rycote manufacturer's part number for this specific product.

Ensure the windjammer is correctly fitted over the lavalier foam and covers it completely. For very strong winds, consider additional wind protection methods if available for your specific microphone.

Check that the windjammer is not excessively large for the foam and is not pressing too hard against the microphone capsule. Ensure you are using the correct size for your lavalier foam.

Verify that the windjammer is stretched snugly over the foam. If the foam is worn or unusually shaped, it might require a different fit or a replacement foam windscreen.

While the windjammer helps with rustle, severe rustling may require careful mic placement or alternative mounting solutions to isolate it from clothing contact.