Spares2Go Dishwasher Door Lock Interlock - Grey - 32037542

Common symptoms include the dishwasher refusing to start, the 'door open' indicator light staying on, or wash cycles stopping unexpectedly. The appliance may not power up at all.

No, this specific part is designed for certain Russell Hobbs and Swan dishwasher models. Always check the compatibility list or your appliance's manual for the correct part number.

Typically, basic tools like a screwdriver set (Phillips and/or flathead) are sufficient. You may also need pliers for wire connectors if they are particularly tight.

For users with some DIY experience, installation can often be completed within 30-60 minutes.

The model number is usually located on a sticker inside the door frame, on the edge of the door, or on the side of the dishwasher casing.

This part is compatible with several part numbers (e.g., 32013875, 32009280). It is best to cross-reference your original part number with the listed compatible numbers or your dishwasher's manual.

First, re-check all electrical connections to the new lock. Ensure the door is closing properly. If issues persist, it may indicate another fault within the dishwasher, and professional service might be required.

Ensure the wiring harness is securely connected to the new lock. Double-check that the correct part number was purchased for your model. Verify the door is closing fully and making contact with the latch.

Check for any obstructions preventing the door from staying fully closed. Ensure the new lock is correctly seated and secured. If the problem persists, the issue might lie with the dishwasher's main control board.

Consult your dishwasher's manual for the specific error code meaning. Confirm the replacement lock is compatible with your model and correctly installed.

Ensure all mounting screws for the interlock are tightened correctly. Check that the door itself is not damaged or misaligned, which could affect the latching mechanism.