Shopping.co.uk

DJM Direct Mig Welder - DJMMIG130

DJM Direct Mig Welder - DJMMIG130

This DJM Direct Mini Mig Welder 130A is perfect for gasless mig welding applications, whether in a...

Best current price£69.95from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £69.95 - £79.95

View price history by clicking the chart icon.

B&QB&Q - Djm Professional No Gas Mini Mig Welder130A 230V
Free delivery in 1–3 days
£69.95
Visit shop
eBayGasless MIG Welder 130Amp Portable No-Gas Welding Machine 230V DIY Workshop DJM
Free delivery in 1–3 days
£79.95
Visit shop

Product Information

Full details

This guide is for anyone using the DJM Direct Mini Mig Welder 130A, whether you're a beginner or experienced welder. The key benefit is its gasless operation, making it highly portable and convenient for various welding tasks. Keep in mind that this welder is best suited for up to 3mm mild steel. This guide covers setup, operation, and troubleshooting for the DJM Direct Mini Mig Welder 130A, highlighting its features such as wire speed control, welding current adjustment, and included accessories.

All features

Model Part NumberDJMMIG130
BrandDJM Direct

Extended Product Information

FAQs

What type of welding wire should I use?

Use 0.6-0.9mm flux-cored welding wire.

What materials can I weld with this welder?

This welder is designed for welding mild steel.

What is the maximum thickness of steel I can weld?

The welder is rated to weld up to 3mm mild steel.

What accessories are included?

The welder comes with a welding torch, wire brush, face shield, and a spool of 0.9mm wire and welding tips.

What is the duty cycle of the welder?

The output amperage range @ duty cycle is 50A@60% 120A@ 10%.

Where can I find replacement parts?

Replacement parts can be found through the manufacturer, DJM Direct, or through welding supply stores.

How do I adjust the welding current?

There is a welding current adjustment knob on the welder to set the output amperage.

What kind of power supply does the welder need?

The welder requires a 230V / 50Hz power supply and a 13A fuse.

Troubleshooting

Welder won't turn on.

Check the power connection and ensure the mains switch is turned on. Verify the fuse is intact and replace if necessary.

Poor weld quality (porosity, weak welds).

Ensure the workpiece is clean of rust, paint, and contaminants. Adjust the wire speed and welding current settings. Check for proper contact of the earth clamp.

Wire feed issues (wire jams or doesn't feed).

Check the wire spool for tangles. Inspect the welding torch liner for blockages and replace if necessary. Adjust the wire feed tension.

Welder overheats.

Allow the welder to cool down. Reduce the welding time or lower the amperage setting. Ensure adequate ventilation around the welder.

Pros and Cons

Pros

  • No need for cumbersome gas bottles, increasing portability.
  • Suitable for outdoor use due to the gasless design, minimizing wind interference.
  • Faster welding time compared to traditional methods.
  • Reduced operator training time.
  • Minimizes post-welding cleaning operations.
  • Efficient use of welding consumables.

Cons

  • Limited to gasless MIG welding applications.
  • Maximum mild steel thickness of 3mm.
  • May not be suitable for all types of metals.
  • Requires flux-cored wire.
  • May require practice to achieve optimal welds.
  • Duty cycle limitations at higher amperage settings.

Setup, Compatibility & Care

  1. Setup:
  • Connect the earth clamp to the workpiece, ensuring a secure connection.
  • Install the 0.9mm welding wire spool.
  • Adjust the wire speed and welding current according to the material thickness and welding requirements.
  • Connect the welder to a 230V / 50Hz power supply.
  1. Compatibility:
  • Power Supply: Requires a 230V / 50Hz power supply and a 13A fuse.
  • Welding Wire: Compatible with 0.6-0.9mm flux-cored welding wire.
  • Materials: Specifically designed for welding mild steel.
  1. Care:
  • Cleaning: Regularly clean the wire feed mechanism and welding torch to prevent blockages.
  • Storage: Store the welder in a dry place when not in use.
  • Inspection: Inspect the cables, clamps, and torch for damage before each use.
  • Duty Cycle: Be mindful of the duty cycle. Allow the welder to cool down if it overheats. The output amperage range @ duty cycle is 50A@60% 120A@ 10%.

Similar items

Milwaukee Circular Saw - HD18 CSFrom £140Ryobi Combi Drill & Torch Starter Kit - 18V ONE+ Cordless - 2x2.0AhFrom £110Stanley Saw Storage Mitre Box With Saw - 1-19-800From £16Einhell Power X-Change Cordless Coffee Machine - RedFrom £57Echo DCS-3500 Chainsaw - 56vFrom £459SIP Weldmate Mig Welder - 100AFrom £122Ryobi 18V ONE+ Cordless Combi Drill, Circular Saw & Random Orbital Sander Kit - RC18K1-20SFrom £230Draper Gas/Gasless MIG Inverter Multi-Welder, 200A - 70046From £311Draper Storm Force Gasless MIG Welder - 100AFrom £99Hilka Vehicle Winch - 12VFrom £84Milwaukee M12 Impact Ratchet - 1/4" Drive - 2.0Ah BatteryFrom £134Draper Arc Welder - 180AFrom £101

Price History

DatePrice
Visit shop