AB Tools Horizontal X Restraint Strap - Silver - 10 Pk

Its primary use is for horizontally connecting timber pieces to masonry structures, such as holding a wooden beam to a brick wall.

It features a unique 'X' reinforcement in the bend for increased performance and strength, and it comes pre-drilled for faster installation.

This strap has a fixed right-angle bend, making it ideal for 90-degree connections. It is not designed for angled applications unless the angle matches the bend.

The strap is pre-drilled with 6mm holes and can be used with wood screws for timber and appropriate masonry fixings (like wall plugs and screws) or metal nails for masonry.

The total length is 1000 mm, with the bend measuring 900 mm on one leg and 100 mm on the other. The holes are 6mm in diameter and spaced at 25mm offset centres.

Yes, it is made from galvanized steel, which provides good resistance to corrosion and is suitable for many building construction applications, including outdoor use.

No, the pack contains 10 x straps. You will need to supply your own suitable wood screws, metal nails, or masonry fixings.

Ensure the surfaces of the timber and masonry are reasonably flat. Check for debris or unevenness preventing a snug fit.

Verify you are using the correct diameter fixings (6mm holes). For masonry, ensure appropriate wall plugs are used and correctly installed. For timber, pre-drilling pilot holes can ease insertion, especially in hardwoods.

Confirm the strap is securely fastened to both elements. Ensure the 'X' reinforcement is correctly oriented at the bend. Check if the load exceeds the strap's intended capacity or if additional support is needed.

The galvanized coating provides protection. Minor surface rust can be treated. For significant corrosion, consider replacement to ensure structural integrity.