Torque E Bike Lockring Tool - Bosch, Brose, Yamaha PW-X

This tool is designed for Bosch (Gen 4), Brose, and Yamaha PW-X e-bike motor units.

You will need a 1/2" drive wrench (preferably a torque wrench for correct installation) or a 24mm open-ended wrench.

No, the wrench (1/2" drive or 24mm) is not included with the Torque E Bike Lockring Tool.

The tool is made from heat-treated steel for enhanced strength and durability.

No, this tool is specifically designed for the chainring lockrings on the mentioned e-bike motor units and is not intended for general bicycle maintenance.

Clean the tool with a dry cloth after use and store it in a dry environment to prevent corrosion. Avoid using harsh chemicals or abrasive cleaners.

Verify that your e-bike motor is one of the specified compatible models (Bosch Gen 4, Brose, Yamaha PW-X). Ensure you are using the correct side of the tool if applicable.

Ensure you are using an appropriate wrench and applying steady, controlled force. Refer to the motor manufacturer's specifications for proper torque values. For removal, a penetrating oil might be needed, applied sparingly and allowed to soak.

Confirm that the tool is fully seated on the lockring and that the wrench is securely attached to the tool. Check for any debris in the splines of the lockring or tool.