Best current price£15.50from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£15.50Visit shop Bluespot Tools 9508 Bolt Cutters 450Mm (18In)
Visit shop
B&Q£21.25Visit shop B&Q - 9508 Bolt Cutters 450mm 18In B/s9508
Visit shop7 offers from £15.50 - £21.25
View price history by clicking the chart icon.
The BlueSpot Tools 450mm Bolt Cutters are designed for professionals and DIY enthusiasts who need to cut through low tensile materials efficiently. Their primary benefit lies in the durable, heat-treated blades that ensure longevity and reliable performance. A key consideration is that these cutters are specifically for low tensile materials and may not perform optimally on hardened steel or high-tensile wires.
| Model Part Number | 9508 |
|---|---|
| Brand | BlueSpot Tools |
These bolt cutters are designed for materials with low tensile strength, such as mild steel bolts, chains, rods, and soft wires. They are not suitable for hardened steel or high-tensile materials.
The maximum cutting diameter depends on the material's tensile strength. For typical mild steel, they can handle up to approximately 10mm (3/8 inch), but this should be tested cautiously.
After use, clean the blades with a dry cloth and apply a light coating of oil to prevent rust. Store them in a dry environment.
The blades are fixed and not designed to be user-replaceable. If they become damaged or excessively dull, the entire bolt cutter may need to be replaced.
'Drop forged' means the metal was heated and hammered into shape using a die. This process creates a stronger, more durable tool compared to other manufacturing methods.
Heat treatment increases the hardness and strength of the steel blades. This allows them to retain a sharp edge longer and cut through materials more effectively without deforming.
Ensure you are cutting a material within the low tensile strength specification. Check for any debris or rust on the blades and clean them thoroughly. Ensure the bolt cutter is properly aligned with the material.
Verify the material's tensile strength is appropriate for the bolt cutters. Ensure the pivot point is clean and lubricated. For very tough cuts within the material's limit, positioning yourself for better leverage might help.
Stop using the bolt cutters immediately if blades are damaged. This likely indicates an attempt to cut material that is too hard or thick. Inspect for nicks or bending, and if significant damage has occurred, the tool may need replacement.
No specific setup is required for the BlueSpot Tools Bolt Cutters; they are ready for use out of the box. Ensure the blades are clean before each use. Compatibility is limited to low tensile materials such as mild steel, aluminum, and soft iron. Avoid attempting to cut hardened steel, spring steel, or thick cables, as this can damage the tool. After use, wipe the blades clean with a dry cloth and apply a light coat of oil to prevent rust, especially if stored in a humid environment. Store them in a dry place, away from moisture.
