Hammerite Stone Chip Shield is formulated to protect your paintwork against stones, salt, damp and...Hammerite Stone Chip Shield is formulated to protect your paintwork against stones, salt, damp and rust. Providing a tough, durable coating, use it to protect sills, lower body panels and spoilers against stone chip damage. Its non drip formula is easy to apply and will remain flexible - removing the worry of it cracking or peeling. It is also rust resistant and is over-paintable with most top coats. Comes as black schutz (which an ideal formula to use with spraying equipment) in a 1 litre can. The Hammerite range is designed to protect and preserve metal surfaces.
AmazonHammerite Stone Metal Paint | 5092834 Protects against stone chip damage, salt, damp and rust while remaining flexible without cracking or peeling.
Hammerite Stone Chip Shield. Spray Shield Underseal Gray Metal Paint for Cars. 8 Year Protection - 600ml Aerosol 1.5 SqM CoverageFree delivery in 1–3 days£11.95Visit shop →
Hammerite 5092832 Stone Chip Shield Black 600ml (Aerosol) | 5092832 Protects against stone chip damage, salt, damp and rust while remaining flexible without cracking or peeling.Free delivery in 1–3 days£14.53Visit shop →
Blueperry agriculture (UK)Hammerite Black Stonechip Shield Aerosol 600Ml 5092832
This guide is designed for vehicle owners and DIY enthusiasts looking to protect their car's paintwork from stone chips, rust, and the elements. Hammerite Stone Chip Shield provides a durable, flexible coating that's easy to apply, offering excellent protection for sills, lower body panels, and spoilers. Note that it's crucial to prepare the surface correctly for optimal adhesion and performance.
All features
Model Part Number
5092835
Brand
Hammerite
Extended Product Information
FAQs
What is the coverage of Hammerite Stone Chip Shield?
You can expect a surface coverage of 4-5 m²/L.
How long does it take for the Stone Chip Shield to dry?
The minimum drying time is 2 hours, and the maximum is 3 hours before overpainting with a topcoat. Recoat after a minimum of 3 hours, and a maximum of 5 hours.
Can I use this product on plastic?
No, it is designed for metal surfaces only.
Is Hammerite Stone Chip Shield suitable for outdoor use?
Yes, it is designed for outdoor use and provides protection against the elements.
What should I do if I get the product on my skin?
Remove contaminated clothing and wash the affected area with soap and water. If irritation persists, seek medical advice. See HSE note for more information.
How should I store the product?
Store in a cool, well-ventilated place away from heat and open flames.
Can I use this product with a brush?
It is designed to be used with spraying equipment. The non-drip formula is ideal for this application method.
What is the finish of the Hammerite Stone Chip Shield?
The finish is matt.
Troubleshooting
Coating is peeling after application.
Ensure proper surface preparation (cleaning and abrading) before application and apply the correct number of coats. Allow the recommended drying time between coats and before overpainting.
Uneven finish or drips during application.
Adjust the spraying distance, pressure, and technique. Ensure a consistent, even coat and avoid applying too much product at once.
Rust appearing under the coating.
Thoroughly remove all rust before application. Consider using a rust converter before applying Hammerite Stone Chip Shield.
Pros and Cons
Pros
Durable protection against stone chips, rust, and corrosion.
Flexible coating prevents cracking and peeling.
Easy to apply with spray equipment due to the non-drip formula.
Over-paintable, allowing for customization and integration with existing paint.
Specifically designed for vulnerable areas like sills and lower panels.
Provides a long-lasting protective barrier.
Cons
Requires proper surface preparation for optimal adhesion.
Solvent-based, which requires adequate ventilation during application.
Drying and recoating times must be followed.
Only available in Black.
May require multiple coats for maximum protection.
Setup, Compatibility & Care
Surface Preparation:
Ensure the surface is clean, dry, and free of loose rust and old paint.
Abrade the surface to improve adhesion.
Application:
Shake the can well before use.
Spray at a pressure of 60-80psi (4-6Bar) from a distance of 30-50cm (12-20 inches).
Apply a minimum of one coat, and a maximum of two coats.
Allow 3-5 hours before overpainting with a topcoat.
Compatibility:
Suitable for metal surfaces.
Over-paintable with most top coats.
Not suitable for indoor use.
Care:
Clean spraying equipment with Hammerite Brush Cleaner & Thinners after use.